A.This command should be executed from the global configuration mode
B.The IP address 10.121.16.8 is the local router port used to forward data
C.102 is the remote DLCI that will receive the information
D.This command is required for all Frame Relay configurations
E.The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
您可能感興趣的試卷
你可能感興趣的試題
A.PPP
B.WAP
C.HDLC
D.MPLS
E.L2TPv3
F.ATM
A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface
B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
C.Configure many sub-interfaces on the same subnet
D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces
A.show reload
B.show boot
C.show running-config
D.show version
A.LAN
B.routing
C.WAN
D.network
A.RIPng
B.OSPFv3
C.IS-IS for IPv6
D.static
A.presentation
B.session
C.transport
D.network
E.physical
A.transport
B.network
C.presentation
D.session
E.application
A.minimum cell rate (MCR)
B.quality of service (QoS)
C.modulation
D.packet switching exchange (PSE)
E.reliable transport protocol (RTP)
A.standby logic-channel logic-channel-number [priority]
B.standby nterface interface-type interface-number
C.logic-channel logic-channel-number
D.dialer map protocol next-hop-address dialer-string[logic-channel logic-channel-number]
A.It specifies use of a static encryption key that must be changed frequently to enhance security
B.It requires use of an open authentication method
C.It specifies the use of dynamic encryption keys that change each time a client establishes a connection
D.It requires that all access points and wireless devices use the same encryption key
E.It includes authentication by PSK
最新試題
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字數字是什么?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。下列哪組設備僅包含中間設備?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中需要多少個邏輯地址范圍?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()