單項選擇題Which command can you use to manually assign a static IPV6 address to a router interface?()

A.ipv6 address PREFIX_1::1/64
B.ipv6 autoconfig 2001:db8:2222:7272::72/64
C.ipv6 autoconfig
D.ipv6 address 2001:db8:2222:7272::72/64


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題For what two purposes does the Ethernet protocol use physical addresses? ()

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30

2.多項選擇題

What can be determined from the line of show ip route output shown in the exhibit?()

A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.

3.單項選擇題使配置的訪問列表應用到接口上的命令是什么?()

A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound

4.多項選擇題Which destination addresses will be used by Host A to send data to Host C?()

A.the IP address of Switch 1
B.the MAC address of Switch 1
C.the IP address of Host C
D.the MAC address of Host C
E.the IP address of the router's E0 interface
F.the MAC address of the router's E0 interface

5.單項選擇題在一個接口配置x25 map ip 102.112.43.125 x121-address 12345命令,其中102.112.43.125和123456分別是()。

A.對端的IP地址和對端的x.121地址
B.對端的IP地址和本接口的x.121地址
C.本接口的IP地址和對端的x.121地址
D.本接口的IP地址和本接口的x.121地址

6.單項選擇題Why will as witch never learn a broadcast address?()

A.Broadcast frames are never sent to swiches.
B.Broadcast addresses use an incorrect format for the switching table.
C.A broadcast address will never be the source address of a frame.
D.Broadcasts only use network layer addressing.
E.A broadcast frame is never forwarded by a switch.

7.單項選擇題Which command shows if an access list is assigned to an interface?()

A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]

8.多項選擇題x.25協議包含三層()。

A.分組層
B.數據鏈路層
C.物理層
D.傳輸層
E.網絡層

9.多項選擇題Which of the following are types of flow control?()

A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.load balancing

最新試題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()

題型:單項選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:單項選擇題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()

題型:多項選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()

題型:單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:單項選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題