A.It creates a VLAN 999 interface.
B.It designates VLAN 999 for untagged traffic.
C.It blocks VLAN 999 traffic from passing on the trunk.
D.It designates VLAN 999 as the default for all unknown tagged traffic.
您可能感興趣的試卷
你可能感興趣的試題
A.在終端設備之間傳送比特流
B.建立、維護虛電路,進行差錯校驗和流量控制
C.定義電壓、接口、線纜標準、傳輸距離等特性
A.190.0.0.0
B.190.233.0.0
C.190.233.27.0
D.190.233.27.1
A.網絡地址和主機地址
B.主機地址和網絡掩碼
C.網絡地址和網絡掩碼
A.ISO
B.ITU
C.IETF
D.IEEE
A.VLANs establish broadcast domains in switched networks.
B.VLANs utilize packet filtering to enhance network security.
C.VLANs provide a method of conserving IP addresses in large networks.
D.VLANs provide a low-latency internetworking alternative to routed networks.
E.VLANs allow access to network services based on department, not physical location.
F.VLANs can greatly simplify adding, moving, or changing hosts on the network.
A.RIP
B.BGP
C.OSPF
D.EIGRP
A.線纜,如光纖、雙絞線、同軸電纜等
B.集線器
C.MODEM
D.路由器
A.網絡互聯
B.網絡分層
C.七層模型
D.制定標準
A.It establishes a static route to the 172.16.3.0 network
B.It establishes a static route to the 192.168.2.0 network
C.It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network
D.It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4
E.It uses the default administrative distance
F.It is a route that would be used last if other routes to the same destination exist
最新試題
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()