單項選擇題On point-to-point networks, OSPF hello packets are addressed to which address()。

A.127.0.0.1
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.224.0.0.5
F.254.255.255.255


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題改變您的Quidway路由器名字為myrouter時,應輸入什么命令?()

A.config myrouter
B.display myroter
C.sysname myrouter

2.多項選擇題

Which of the following statements describe the network shown in the graphic?()

A.There are two broadcast domains in the network.
B.There are four broadcast domains in the network.
C.There are six broadcast domains in the network.
D.There are four collision domains in the network.
E.There are five collision domains in the network.
F.There are seven collision domains in the network.

4.多項選擇題Which characteristics are representative of a link-state routing protocol? ()

A.provides common view of entire topology
B.exchanges routing tables with neighbors
C.calculates shortest path
D.utilizes event-triggered updates
E.utilizes frequent periodic updates

6.多項選擇題Which two commands correctly verify whether port security has been configured on port FastEthernet 0/12 on a switch?()

A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1#show swithport port-secure interface FastEthernet 0/12
C.SW1#show port-secure interface FastEthernet 0/12
D.SW1#show running-config

7.多項選擇題下面接口為物理接口的有()。

A.dialer
B.語音接口
C.serial口
D.子接口
E.CE1/PRI接口
F.虛擬接口模板
G.ISDNBRI接口
H.備份中心邏輯通道

8.多項選擇題Which of the following statements are true regarding bridges and switches?()

A.Switches are primarily software based while bridges are hardware based.
B.Both bridges and switches forward Layer 2 broadcasts.
C.Bridges are frequently faster than switches.
D.Switches have a higher number of ports than most bridges.
E.Bridges define broadcast domains while switches define collision domains.
F.Both bridges and switches make forwarding decisions based on Layer 2 addresses.

9.單項選擇題In the implementation of VLSM techniques on a network using a single Class C IP address, which subnet mask is the most efficient for point-to-point serial links()。

A.255.255.255.0
B.255.255.255.240
C.255.255.255.248
D.255.255.255.252
E.255.255.255.254

最新試題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題

請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()

題型:多項選擇題

OSI 哪一層可提供有序的數據重構服務?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()

題型:單項選擇題