A.16
B.32
C.4095
D.4096
您可能感興趣的試卷
你可能感興趣的試題
A.10.10.0.0/18 subnetted with mask 255.255.255.252
B.10.10.0.0/25 subnetted with mask 255.255.255.252
C.10.10.0.0/24 subnetted with mask 255.255.255.252
D.10.10.0.0/23 subnetted with mask 255.255.255.252
E.10.10.0.0/16 subnetted with mask 255.255.255.252
A.映射本地IP到對端端口值,以便路由器發送數據時確認發送端口
B.映射本地IP到本地端口值,以便路由器發送數據時確認發送端口
C.映射對端IP到本地端口值,以便X.25交換網絡查找數據發送路徑
D.映射對端IP到對端端口值,以便X.25交換網絡查找數據發送路徑
A.150.150.0.0
B.150.150.0.8
C.150.150.8.0
D.150.150.16.0
A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30
The switches shown in the diagram, Core and Core2, are both Catalyst 2950s. The addressing scheme for each company site is as follows:Router Ethernet port - 1st usable addressCore - 2nd usable addressCore2 - 3rd usable addressFor this network, which of the following commands must be configured on Core2 to allow it to be managed remotely from any subnet on the network? ()
A.Core2(config)# interface f0/0 Core2(config-if)# ip address 192.168.1.10 255.255.255.248
B.Core2(config)# interface vlan 1 Core2(config-if)# ip address 192.168.1.11 255.255.255.248
C.Core2(config)# line con 0 Core2(config-line)# password cisco
D.Core2(config)# line vty 0 4 Core2(config-line)# password cisco
E.Core2(config)# ip default-gateway 192.168.1.9
F.Core2(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.8
A.a primary route,stored in the routing table
B.a backup route,stored in the routingt able
C.a backup route,stored in the topology table
D.A primary route,stored in the topology table
A.子網掩碼
B.源網絡地址
C.目的網絡地址
D.下一跳地址
A.應用層
B.表示層
C.會話層
D.傳輸層
E.網絡層
F.鏈路層
G.物理層
最新試題
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
OSI 哪一層可提供有序的數據重構服務?()