A.Layer 2
B.Layer 3
C.Layer 4
D.Layer 5
E.Layer 6
F.Layer 7
您可能感興趣的試卷
你可能感興趣的試題
A.Authentication needs to be changed to PAP for both routers.
B.Serial IP addresses of routers are not on the same subnet.
C.Username/password is incorrectly configured.
D.Router names are incorrectly configured.
Exhibit: Which of the following are true regarding the command output shown in the display (Choose two.)()。
A.There are at least two routers participating in the RIP process.
B.A ping to 192.168.168.2 will be successful.
C.A ping to 10.0.15.2 will be successful.
D.RtrA has three interfaces participating in the RIP process.
A.#vtp domain unset
B.#delete vlan.dat
C.#novtp domain
D.#vtp domain null
A.RIP
B.BGP
C.OSPF
D.EIGRP
A.Administratively shut down the interfaces.
B.Physically secure the interfaces.
C.Configure a virtual terminal password and login process.
D.Enter an access list and apply it to the terminal interfaces using the access-class command.
E.Create an access list and apply it to the terminal interfaces using the access-groupc ommand.
A.application layer
B.session layer
C.transport layer
D.network layer
E.datalink layer
F.physical layer
A.A DHCP client uses a ping to detect address conflicts.
B.A DHCP server uses a gratuitous ARP to detect DHCP clients.
C.A DHCP client uses a gratuitous ARP to detect a DHCP server.
D.If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.
E.If an address conflict is detected, the address removed from the pool for an amount of time configurable by the administrator.
F.If an address conflict is detected, the address is removed from the pool and will not be reused until server is rebooted.
根據下圖,哪個選項描述了DLCI 17?()
A.DLCI 17描述了R2和R3之間的ISDN線路
B.DLCI 17描述了一條在R2上的PVC 不能用在R3和R1上
C.DLCI 17是R2使用的二層地址,用來描述一條到R3的PVC
D.DlDLCI 17描述了一條從R2 R3到服務提供商撥號網絡
A.It divides the network communication process into smaller and simpler components, thus aiding component development, design, and troubleshooting.
B.It enables equipment from different vendors to use the same electronic components, thus saving research and development funds.
C.It supports theevolution of multiple competing standards, and thus provides business opportunities for equipment manufacturers.
D.It encourages industry standardization by defining what functions occur at each layer of the model.
E.It provides a means by which changes in functionality in one layer require changes in other layers.
A.BSS
B.ESS
C.IBSS
D.SSID
最新試題
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。下列哪組設備僅包含中間設備?()
OSI 模型的哪兩項功能在第2層實現?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中存在多少個廣播域?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()