多項選擇題Which of the following describe the process identifier that is used to run OSPF on a router? （）

A.It is locally significant.
B.It is globally significant.
C.It is needed to identify a unique instance of an OSPF database.
D.It is an optional parameter required only if multiple OSPF processes are running on the router.
E.All routers in the same OSPF area must have the same process ID if they are to exchange routing information.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met? （）

A.Each end of the trunk line must be set to IEEE 802.1E encapsulation.
B.The VTP management domain name of both switches must be set the same.
C.All ports on both the switches must be set as access ports.
D.One of the two switches must be configured as a VTP server.
E.A rollover cable is required to connect the two switches together.
F.A router must be used to forward VTP traffic between VLANs.

2.單項選擇題

Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown？（）

 

A.The Serial 0/0 interface is passing traffic.
B.The DLCI 100 was dynamically allocated by the router.
C.The Serial 0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server.
D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud.
E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP.

4.多項選擇題Which two are features of IPv6?（）

A.multicast
B.broadcast
C.allcast
D.podcast
E.anycast

5.多項選擇題Host 1 is trying to communicate with Host 2. The e0 interface on Router C is down. Which of the following are true? （）

A.Router C will use ICMP to inform Host 1 that Host 2 cannot be reached.
B.Router C will use ICMP to inform Router B that Host 2 cannot be reached.
C.Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached.
D.Router C will send a Destination Unreachable message type.
E.Router C will send a Router Selection message type.
F.Router C will send a Source Quench message type.

6.單項選擇題Which command enables RSTP on aswitch?（）

A.spanning-tree mode rapid-pvst
B.spanning-tree uplinkfast
C.spanning-tree backbonefast
D.spanning-tree mode mst

7.多項選擇題Which two addresses can be assigned to a host with a subnet mask of 255.255.254.0？（）

A.113.10.4.0
B.186.54.3.0
C.175.33.3.255
D.26.35.2.255
E.17.35.36.0

8.單項選擇題When two hosts are trying to communicate across a network, how does the host originating thecommunication determine the hardware address of the host that it wants to "talk" to?（）

A.RARP request
B.Show Network Address request
C.Proxy ARP request
D.ARP request
E.Show Hardware Address request

9.單項選擇題Which network protocol does DNS use?（）

A.FTP
B.TFTP
C.TCP
D.UDP
E.SCP

10.單項選擇題DNS servers provide what service?（）

A.they run a spell check on host names to ensure accurate routing
B.they map individual hosts to their specific IP address
C.they convert domain names into IP address
D.Given an IP address,they determine the name of the host that is…