欧美亚洲黄色一级,97无码久久久久中文字幕精品,中文字幕av制服丝袜电影

多項選擇題Which two statements describe characteristics of IPv6 unicast addressing?（）

A.Global addresses start with 2000::/3.
B.Link-local addresses start with FE00:/12.
C.Link-local addresses start with FF00::/10.
D.There is only one loopback address and it is ::1.
E.If a global address is assigned to an interface, then that is the only allowable address for the interface.

點擊查看答案

您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Users on the 192.168.1.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server（）。

A.ip route 0.0.0.0 0.0.0.0 s0/0/0
B.ip route 0.0.0.0 0.0.0.0 209.165.200.226
C.ip route 209.165.200.0 255.255.255.0 192.168.1.250
D.ip route 192.168.1.0 255.255.255.0 209.165.100.250

點擊查看答案

2.單項選擇題Which command shows if an access list is assigned to an interface？（）

A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]

點擊查看答案

3.多項選擇題Which two devices can interfere with the operation of a wireless network because they operate on similar frequencies? （）

A.copier
B.microwave oven
C.toaster
D.cordless phone
E.IP phone
F.AM radio

點擊查看答案

4.單項選擇題If the router R1 has a packet with a destination address 192.168.1.255, what describes the operation of the network（）。

A.R1 will forward the packet out all interfaces.
B.R1 will drop this packet because this it is not a valid IP address.
C.As R1 forwards the frame containing this packet, Sw-A will add 192.168.1.255 to its MAC table.
D.R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF
E.As R1 forwards the frame containing this packet, Sw-A will forward it to the device assigned the IP address of 192.168.1.255.

點擊查看答案

5.單項選擇題A host is attempting to send data to another host on a different network. What is the first action that the sending host will take?（）

A.Drop the data.
B.Send the data frames to the default gateway.
C.Create an ARP request to get a MAC address for the receiving host.
D.Send a TCP SYN and wait for the SYN ACK with the IP address of the receiving host.

點擊查看答案

6.單項選擇題 Refer to the exhibit.The Lakside Company has the internetwork in the exhibit.The administrator would liketo reduce the size of routing table on the Central router.Which partial routing table entry in the Central routerepresents a route summary that represents the vlans in Phoenix but no additional subnets？（）

A.10.0.0.0/22 is subnetted，1 subnets D 10.4.0.0[90/20514560] via 10.2.0.2，6w0d，serial0/1
B.10.0.0.0/28 is subnetted，1 subnets D 10.2.0.0[90/20514560] via 10.2.0.2，6w0d，serial0/1
C.10.0.0.0/22 is subnetted，1 subnets D 10.0.0.0[90/20514560] via 10.2.0.2，6w0d，serial0/1
D.10.0.0.0/30 is subnetted，1 subnets D 10.2.2.0[90/20514560] via 10.2.0.2，6w0d，serial0/1
E.10.0.0.0/28 is subnetted，1 subnets D 10.4.4.0[90/20514560] via 10.2.0.2，6w0d，serial0/1
F.10.0.0.0/30 is subnetted，1 subnets D 10.4.4.4[90/20514560] via 10.2.0.2，6w0d，serial0/1

點擊查看答案

7.多項選擇題A single 802.11g access point has been configured and installed in the center of a square officE.A few wireless users are experiencing slow performance and drops while most users are operating at peak efficiency. What are three likely causes of this problem? （）

A.mismatched TKIP encryption
B.null SSID
C.cordless phones
D.mismatched SSID
E.metal file cabinets
F.antenna type or direction

點擊查看答案

8.多項選擇題hat two things will a router do when running a distance vector routing protocol？（）

A.Send periodic updates regardless of topology changes.
B.Send entire routing table to all routers in the routing domain.
C.Use the shortest-path algorithm to the determine best path.
D.Update the routing table based on updates from their neighbors.
E.Maintain the topology of the entire network in its database.

點擊查看答案

9.多項選擇題 The OSPF process has been started and the networks have been configured for Area 0 as shown in the diagram. The network administrator has several options for configuring RouterB to ensure that it will be preferred as the designated router (DR) for the 172.16.1.0 /24 LAN segment. What configuration tasks could be used to establish this preference (Choose three.)（）。

A.Configure the priority value of the Fa0/0 interface of RouterB to a higher value than any other interface on the Ethernet network.
B.Change the router id of Router B by assigning the IP address 172.16.1.130/24 to the Fa0/0 interface of RouterB.
C.Configure a loopback interface on RouterB with an IP address higher than any IP address on the other routers.
D.Change the priority value of the Fa0/0 interface of RouterB to zero.
E.Change the priority values of the Fa0/0 interfaces of RouterA and RouterC to zero.
F.No further configuration is necessary.

點擊查看答案

10.多項選擇題What are two security appliances that can be installed in a network? （）

A.ATM
B.IDS
C.IOS
D.IOX
E.IPS
F.SDM

點擊查看答案