A.spanning-tree mode rapid-pvst
B.spanning-tree uplinkfast
C.spanning-tree backbonefast
D.spanning-tree mode mst
您可能感興趣的試卷
你可能感興趣的試題
A.trunk mode mismatches
B.vlans that do not correspond to a unique IP subnet
C.native vlan mismatches
D.allowing only vlan 2 on the destination.
A.對于語音資源的非授權訪問
B.危害網絡資源
C.偷聽
D.DoS攻擊
A.Enable VTP pruning
B.From privileged mode ,erase the startup configuration file,then reload.
C.From privileged mode ,erase the vlan date file, then reload.
D.Cycle the switch power.
A.they run a spell check on host names to ensure accurate routing
B.they map individual hosts to their specific IP address
C.they convert domain names into IP address
D.Given an IP address,they determine the name of the host that is…
A.無線網絡使用WEP或WPA/TKIP是非常安全的,不容易受到黑客攻擊
B.無線網絡使用WPA2/AES應該有至少6個字符的密碼短語
C.如果IPSec VPN是可用的,那么在任何公共無線LAN中部署它
D.如果無線接入不是必須的,禁用無線設備或無線NIC
A.單站部署
B.集中與遠程分支呼叫處理
C.分布式呼叫處理部署
D.通過IP WAN 的組群
A.Flash,TFTP server,ROM
B.Flash,NVRAM,ROM
C.ROM,NVRAM,TFTP server
D.NVRAM,TFTP server,ROM
E.TFTP server,F(xiàn)lash,NVRAM
A.complicated header
B.plug-and-play
C.no broadcasts
D.checksums
E.optional IPsec
F.autoconfiguration
A.預先的威脅和入侵檢測能力能檢測無線攻擊并進行防御
B.全面保護機密數據和通信安全
C.單一用戶標識和策略簡化了用戶管理和非授權訪問的保護
D.和有線安全系統的合作確保了無線安全功能和防護的全面性
Refer to the graphic.Computer 1 is consoles into switch A.Telnet connections and pings run from thecommand prompt on switch A fail.Which of the following could cause this problem?()
A.switch A dose not have a cdp entry for switch
B.or router JAXB.switch A dose not have an IP address
C.port 1 on switch A should be an access port rather than a trunk port
D.switch A is not directly connected to router JAX
E.switch A does not have a default gateway assigned
最新試題
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
OSI 模型的哪兩項功能在第2層實現?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
要將數據包發送到遠程網絡,應使用哪種設備?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。下列哪組設備僅包含中間設備?()