A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.
B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.
C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.
D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.
E.Vtp client is the default vtp mode
F.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally
您可能感興趣的試卷
你可能感興趣的試題
A.IKE
B.安全套階層
C.SSH
D.PGP
A.10
B.40
C.30
D.20
A.remote DLCI on the main interface
B.local DLCI on the main interface
C.local DLCI on the subinterface
D.remote DLCI on the subinterface
A.加密—加密—解密
B.加密—解密—加密
C.解密—加密—解密
D.加密—加密—加密
A.traceroute address
B.tracert address
C.ssh address
D.telnet address
A.one
B.three
C.two
D.zero
A.算法是受到密碼界社團信任的
B.算法能夠充分抵抗強力攻擊
C.算法支持可變的和長的密鑰長度以及擴展性
D.算法有沒有出口和進口限制
A.PVST+reduces the CPU cycles for all the switches in the network
B.PVST+automatically selects the root bridge location,to provide optimiz…
C.PVST+allow the root switch location to be optimized per vlan.
D.PVST+supports Layer 3 load balancing without loops.
A.Security increases because only the network administrator may change the routing tables.
B.Configuration complexity decreases as network size increases.
C.Routing updates are automatically sent to neighbors.
D.Route summarization iscompued automatically by the router.
E.Routing traffic load is reduced when used in stub network links
F.An efficient algorithm is used to build routing tables,using automatic updates.
G. Routing tables adapt automatically to topology changes.
A.DES
B.3DES
C.AES
D.SEAL
最新試題
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()