A.The number of FECN packets that are received by the router
B.The number of BECN packets that are received by the router
C.The ip address of the local router
D.The value of the local DLCI
E.The status of the PVC that is configured on the router

A.沖突域的數量會減少。
B.沖突域的數量將增加。
C.廣播域的數量將保持不變。
D.沖突域的數量將保持不變。
E.廣播域的數量將增加。

A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.
B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.
C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.
D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.
E.Vtp client is the default vtp mode
F.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally

A.With a network wide mask of 255.255.255.128， each interface does not require an IP address.
B.With a network wide mask of 255.255.255.128， each interface does require an IP address on a unique IP subnet.
C.With a network wide mask of 255.255.255.0， must be a Layer 2 device for the PCs to communicate with each other.
D.With a network wide mask of 255.255.255.0， must be a Layer 3 device for the PCs to communicate with each other.
E.With a network wide mask of 255.255.254.0， each interface does not require an IP address.

A.服務器的網絡接口的MAC地址
B.主機A的MAC地址
C.路由器接口e1 MAC地址
D.路由器接口e0 MAC地址（host A收到server的幀的源mac地址是host A的網關的mac。）

A.2031:0:130F::9C0:876A:130B
B.2001:0DB8:0000:130F:0000:0000:08GC:140B
C.2001:0DB8:0:130H::87C:140B
D.2031::130F::9C0:876A:130B

A.ARP
B.SSH
C.Telnet
D.WEP
E.SNMPv1
F.SNMPv2

A.Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.Ensure that cables A and B are straight-through cables.
C.Ensure cable A is plugged into a trunk port.
D.Ensure the switch has power.
E.Reboot all of the devices.
F.Reseat all cables.

A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable split horizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP

A.傳輸層把一個數據流分成段，并可以增加可靠性和流控制信息。
B.數據鏈路層增加物理源和目的地地址以及一個FCS字段。
C.當網絡層封裝源和目的地主機的地址和協議相關的控制信息的幀分組被創建。
D.當網絡層增加了第3層的地址和控制信息，以一個段分組被創建。
E.表示層轉換位成電壓為通過物理鏈路傳輸。