單項選擇題

What is the most likely reason for the dispartly between the actual network numbers at the branches and the routes in the routing table on Gateway-Router?()

A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which command is used to display the collection of OSPF link states?()

A.show ip ospf lsa database
B.show ip ospf link-state
C.show ip ospf neighbors
D.show ip ospf database

2.單項選擇題When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?()

A.show ip access-list
B.show access-list
C.list ip interface
D.show interface
E.show ip interface

3.多項選擇題

如圖,如果所有的鏈接都運行在相同的帶寬,哪些端口會被STP指定的端口?()

A. Switch A - Fa0/0
B. Switch A - Fa0/1
C. Switch B - Fa0/0
D. Switch B - Fa0/1
E. Switch C - Fa0/0
F. Switch C - Fa0/1

4.單項選擇題Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?()

A.the switch with the lowest MAC address
B.the switch with the higest MAC address
C.the switch witch the higest IP address
D.the switch with the lowest IP address

5.單項選擇題What is the purpose of the cisco Vlan Trunking protocol?()

A.to provide a mechanism to dynamically assign vlan membership to switch ports
B.to allow traffic to be carried from multiple vlans over a single link between switches
C.to allow native vlan information to be carried over a trunk link
D.to provide a mechanism to manually assign vlan membership to switch ports
E.to allow for managing the additions,deletions,and changes of vlans between switchs

6.多項選擇題802.1Q協議的特點是什么?()

A.它是一個2層的消息協議,它保證通過網絡的VLAN配置
B.它包括一個8比特字段指定的幀的優先級
C.它是專門用于標記的VLAN幀和下交換網絡拓?fù)浣Y(jié)構的變化劑量不能滿足網絡的重新收斂
D.它修改802.3幀報頭,并且因此需要在FCS重新計算
E.它是一種能夠攜帶未標記的幀的中繼協議

7.多項選擇題Which three are characteristics of an IPV6 anycast address?()

A.any-to-many communication model
B.delivery of packets to the group interface that is closest to the sending device
C.one-to-many communication model
D.the same address for multiple devices in the group
E.one-to-nearest communication model
F.a unique IPV6 address for each device in the group

9.單項選擇題下列哪項關于Cisco Catalyst交換機VLAN操作是正確的?()

A.當從一個802.1Q中繼收到一個包時,VLAN ID可以從源MAC地址表確定
B.未知單播幀被重新傳輸只對屬于同一VLAN的端口
C.交換機之間的端口應該在接入模式被配置為使得VLAN可以橫跨端口跨越
D.廣播和多播幀被重發到在不同的VLAN配置的端口

10.多項選擇題

如下圖,對于圖中拓?fù)渲衯lan之間路由,那兩個選項是正確的?()

A.主機E和主機F使用相同的IP網關地址
B.Router1和交換機2應通過交叉線進行連接
C.Router1上不會在主機A和主機D之間的通信中發揮作用
D.在Router1在f0/0接口必須與子接口進行配置
E.Router1上需要更多的LAN接口,以適應顯示在展示的VLAN
F.在Router1和交換機2的trunk端口f0/0接口必須使用相同的封裝類型進行配置

最新試題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:?jiǎn)雾?xiàng)選擇題

以下哪兩種介質可提供高達1Gb/s 的帶寬?()

題型:多項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:?jiǎn)雾?xiàng)選擇題

PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:?jiǎn)雾?xiàng)選擇題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()

題型:?jiǎn)雾?xiàng)選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題