下列哪些陳述正確描述一旦啟動過程中交換機的狀態已經完成?()
A.由于的FastEthernet0/12將是最后上來,它不會被STP阻塞。
B.此交換機的遠程訪問管理將不可能配置更改。
C.多個VLAN將需要此交換機創建。
D.交換機將需要以支持VLAN和STP不同的IOS代碼。
您可能感興趣的試卷
你可能感興趣的試題
所顯示的輸出在一個交換機被產生。哪三種表述是正確的?()
A.所有端口都將在丟棄,學習,或轉發的狀態
B.Thiry VLAN是否該交換機上的配置
C.網橋優先級比生成樹的默認值
D.所顯示的所有接口都在共享媒體
E.所有指定端口都處于轉發狀態
F.開關必須是該交換機上的所有VLAN的根橋
A. SW1#show swithport port-security interface FastEthernet 0/12
B. SW1# show swithport port-secure interface FastEthernet 0/12
C. SW1# show port-secure interface FastEthernet 0/12
D. SW1#show running-config
E. SW1#show port-security interface FastEthernet 0/12
A.手動關閉的接口。
B.物理安全的接口。
C.配置虛擬終端的密碼和登錄過程。
D.輸入一個訪問列表,并將其應用到使用access-class命令終端接口。
E.創建一個訪問列表,并將其應用到使用access-group命令終端接口。
Refer to the exhibit.The network shown in the exhibit is running the RIPv2 routing protocol.The network has converged,and the routers in this network are functioning properly .The FastEthernet0/0 interface on R1 goes down.In which two ways will the routers in this network respond to this change?()
A.R1 will send LSAs to R2 and R3 informing them of this change, and then all routers will send periodic updates at an increased rate until the network again converges.
B.Because of the split-horizon rule, router R2 will be prevented from sending erroneous information to R1 about connectivity to the 192.168.1.0 network.
C.When router R2 learns from R1 that the link to the 192.168.1.0 network has been lost, R2 will respond by sending a route back to R1 with an infinite metric to the network.
D.Routers R2 and R3 mark the route as inaccessible and will not accept any further routing updates from R1 until their hold-down timers expire.
E.All routers will reference their topology database to determine if any backup routes to the 192.168.1.0 network are known.
A. access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B. access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C. access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D. access-list 10 permit ip 192.168.146.0 0.0.0.1.255
E. access-list 10 permit ip 192.168.148.0 0.0.0.1.255
F. access-list 10 permit ip 192.168.146.0 255.255.255.0
A. access-list 50 deny 192.168.1.1 0.0.0.255
B. access-list 110 permit ip any any
C. access-list 2500 deny tcp any host 192.168.1.1 eq 22
D. access-list 101 deny tcp any host 192.168.1.1
A.802.1Q本地VLAN幀未標記的默認
B.802.1Q中繼端口,也可以是安全的端口
C.802.1Q中繼可以使用10Mb/s以太網接口
D.802.1Q中繼需要全雙工,點對點連接
E.802.1Q中繼應該兩頭的本地VLAN是相同的
A.你可以申請多個訪問列表具有相同的協議,或在不同的方向
B.你可以配置一個訪問列表,每個方向,每3層協議(一個端口可以配置In out兩個ACL)
C.你想要的任何界面上,你可以放置盡可能多的訪問列表
D.你可以將任何接口上只有一個訪問列表
Refer to the exhibit.A problem with network connectivity has been observed.It is suspected that the cable connected to switch port Fa0/9 on Switch 1 disconnected.What would be an effect of tis cable being disconnected?()
A.Host B would not be able to access the server in VLAN9 until the cable is reconnected
B.For less than a minute,Host B would not be able to access the server in VLAN9.Then normal network function would resume.
C.Communication between VLAN3 and the other VLANs would be disabled
D.The transfer of files from Host B to the server in VLAN9 would be significantly slower.
圖中顯示了多少個廣播域?()
A.one
B.six
C.twelve
D.two
最新試題
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
OSI 模型的哪兩項功能在第2層實現?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()