A. manage SNMPv3 security access to switches
B. save and copy configuration files and software images
C. configure VLANs and Ethernet port channels
D. manage 2148T FEX， 2232PP FEX， and 2248TP FEX
E. configure FCoE
您可能感興趣的試卷
你可能感興趣的試題
A. A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces.
B. SAN port channels can include up to 16 interfaces.
C. SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
D. The links in SAN port channels can be connected to different sets of switches.
E. The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.
A. The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch.
C. The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.
D. The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.
A. virtualization
B. unified I/O
C. support for 48-port Gb/s line card
D. support for Data Center Service Modules
E. high performance
F. high availability
A. The bring up protocol automatically detects and overrides any misconfiguration.
B. You can manually configure channel groups， or they can be automatically created.
C. Changes in configuration to the SAN port channel interface must also be made to all members of the channel group.
D. The port channel protocol uses the exchange fabric parameters command to communicate across peer ports in an ISL.
E. The port channel protocol ensures that a set of ports is eligible to be part of the same SAN port channel.
A. The chassis needs an EPLD upgrade to support the new module type.
B. The default VDC cannot support F2 modules.
C. The interfaces must be allocated into a VDC for F2 modules only.
D. The module has failed GOLD diagnostics， and the switch has isolated the ports to protect the integrity of the system.
A. FabricPath provides MAC address scalability with conversational learning
B. Loop mitigation with TTL in the frame field
C. STPl independence
D. 10 Gbps bandwidth
E. Layer 2 extensions between data centers
最新試題
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）
Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）
Which of the following are supported in Cisco Global Site Selector？ （）
An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error （Refer to the exhibit）.What is the cause of this error？（）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）
In the event of a GSS failure in a GSS cluster， which is true？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
A Cisco Application Control Engine Appliance （ACE） non-admin context does not support "sticky" configuration. What is the reason for this issue？（）
In a Cisco Unified Computing System， where are SAN port channels connected to？（）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）