Refer to the exhibit. The company uses EIGRP as the routing protocol. What path will packets take from a host on 192.168.10.192/26 network to a host on the LAN attached to router R1?（）
A.The path of the packets will be R3 to R2 to R1.
B.The path of the packets will be R3 to R1 to R2.
C.The path of the packets will be both R3 to R2 to R1 and R3 to R1.
D.The path of the packets will be R3 to R1
您可能感興趣的試卷
你可能感興趣的試題
Two routers named Atlanta and Brevard are connected via their serial interfaces as illustrated, but they are unable to communicate. The Atlanta router is known to have the correct configuration.Given the partial configurations, identify the fault on the Brevard router that is causing the lack of connectivity？（）
A.incompatible IP address
B.insufficient bandwidth
C.incorrect subnet mask
D.incompatible encapsulation
E.link reliability too low
F.IP/TCP closed
A.to map a known DLCI to an IP address
B.to map a known IP address to a MAC address
C.to map known SPID to a MACaddress
D.to map a known DLCI to a MAC address
E.to map a known IP address to a SPID
F.to map a known MAC address to an IP address
A.show frame-relay end-to-end
B.show frame-relay map
C.show frame-relay lmi
D.show frame-relay pvc
A.They create split-horizon issues
B.They require a unique subnet within a routing domain
C.They emulate leased lines
D.They are ideal for full-mesh topologies
E.They require the use of NBMA options when using OSPF
A. NCP
B. LCP
C.ISDN
D.DLCI
E.SLIP
A.defines the source IP address that is used in all broadcast packets on DLCI 202
B.defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
C.defines the destination IP address that is used in all broadcast packets on DLCI 202
D.defines the DLCI on which packets from the 192.168.1.2 IP address are received
A. NIC
B. BIA
C. OUI
D. VAI
A.All TCP traffic is marked discard eligible.
B.All UDP traffic is marked discard eligible and a BECN is sent.
C.All TCP traffic is marked discard eligible and a BECN is sent.
D.All traffic exceeding the CIR is marked discard eligible.
A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable splithorizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP
A.show frame-relay map
B.show frame-relay lmi
C.show inter serial
D.show frame-relay pvc
最新試題
Which three are the components of SNMP? （）
Refer to the exhibit.If the devices produced the given output,what is the cause of the EtherChannel problem?（）
What command visualizes the general NetFlow data on the command line?（）
Which is true about OSPF router-id?（）
What Netflow component can be applied to an interface to track IPv4 traffic?（）
A network administrator creates a layer 3 EtherChannel, bundling four interfaces into channel group 1. On what interface is the IP address configured?（）
What are two benefits of using a single OSPF area network design?（）
Which three features are added in SNMPv3 over SNMPv2 ? （）
Syslog was configured with a level 3 trap. Which 3 types of logs would be generated？（）
What level will be trapped if the administrator executes the command ？（）