Refer to the exhibit.
Your company requires a Cisco UCS configuration that will， at a minimum， allow the configuration in the provided exhibit.
Which Cisco UCS components will meet the requirement？（）
A. Cisco UCS 6148， Cisco UCS 6248UP， or the Cisco UCS 6296UP fabric interconnects
B. Cisco UCS 2104XP Fabric Extender
C. Cisco UCS 2204XP or 2208XP Fabric Extenders
D. Cisco UCS M81KR Virtual Interface Card
E. Cisco UCS Virtual Interface Card 1280
F. Cisco UCS Virtual Interface Card 1240 with a port expander
您可能感興趣的試卷
你可能感興趣的試題
A. Cisco UCS Manager 1.3（xx） or later and a pair of Nexus 2248 FEXes
B. Cisco UCS Manager 2.0（2xx） or later and a pair of Nexus 2232 FEXes
C. Two Cisco UCS 6100 Series or 6200 Series fabric interconnects
D. Two RJ45 Ethernet cables
E. The fabric interconnects must be in end-host mode
A. Uplink Ethernet ports or border ports
B. Appliance ports
C. Server ports
D. Fabric ports
E. Backplane ports
F. vEth interfaces
G. A Fabric Interconnect doesn’t learn MAC addresses in End Host mode. Pinning is used instead.
A. FabricSync is used to synchronize MAC addresses to an adjacent fabric interconnect after a server interface failover.
B. Gratuitous ARPs are sent on fabric interconnect uplinks after a server interface failover.
C. Fabric failover can be used on vNICs and vHBAs.
D. Fabric failover is configured as part of the service profile.
E. Fabric interconnects in end-host mode use fabric failover instead of spanning tree to provide redundancy on uplink ports.
A. Interface inbound-low handles Rx and Tx of low-priority control packet
B. Interface inbound-lo handles Rx and Tx of high-priority control packet
C. Interface inbound-low maps to internal interface eth3
D. Interface inbound-low maps to internal interface eth4
A. The fabric interconnect is in the end-host mode， and all uplink ports have failed.
B. The server port to which the adapter is pinned has failed.
C. A transient error has caused the link to fail.
D. The fabric interconnect is in the switch mode， and all uplink ports have failed.
E. The link for a network-facing host interface is missing.
What would be the cause for the following fault in UCS Manager？（）
"ether VIF x / xxx down， reason： ENM source pinning failed"
A. The associated VLANs of a vNIC are not found on an uplink.
B. Overlapping VLAN IDs exist on upstream disjoint networks.
C. The vNIC was not configured for fabric failover.
D. The vNIC is pinned to the wrong fabric.
E. Overlapping VSAN IDs exist on upstream SAN switches.
F. The vHBA was not configured for failover.
An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error （Refer to the exhibit）.
What is the cause of this error？（）
A. vNIC has a Fibre Channel QoS policy assigned
B. vHBA is assigned to a "best-effort" QoS policy
C. vHBA has no QoS policy assigned
D. vHBA is assigned to an incorrect VSAN
E. vNIC has been assigned to an FCoE VLAN
A. A· unique vEthernet interface will be created on Fabric A· and Fabric B·
B. A· vEthernet interface will be created only on Fabric A·
C. A· vEthernet interface will be created on Fabric A·， and move across to Fabric B· in the event of failure
D. Fabric B· will learn the vEthernet interface from Fabric A· through a GARP E· The same vEthernet interface will be created on Fabric A· and Fabric B·
A. An XML file containing all details of the system， including IP address and cluster details
B. A binary file containing only service profiles， pools， and other items configured after initial configuration
C. A binary file containing all details of the system， including IP address and cluster details
D. An XML file containing only service profiles， pools， and other items configured after initial configuration
E. A text file with the NX-OS running configuration
A. Can be used to migrate from a 6120 to a 6140 and retain the same service profiles
B. Can only be used on the fabric interconnect on which it was created
C. Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information
D. Can be used to match firmware versions between 6120 and 6140 during a migration
最新試題
Which statements are true regarding the Cisco UCS fabric failover feature？ （）
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
Which of the following are supported in Cisco Global Site Selector？ （）
Where are SAN Port Channel is created in UCS Manager？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
In the event of a GSS failure in a GSS cluster， which is true？（）
On a Cisco Unified Computing System （UCS）， which two statements regarding Ethanalyzer are true？（）
A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）
KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector， to report virtual IP and real server availability. Which statement is true about KAL-AP？（）
Which is true when describing a connection replication in Cisco ACE？（）