A.Calls to the PSTN can be made via the use of FXO or T1/E1 trunk ports.
B.Calls to the PSTN can be made via FXS or T1/E1 trunk ports.
C.Analog and IP phones can be connected to the VoIP network via FXO or T1/E1 trunk ports.
D.Calls between analog phones that are attached to the FXS ports in a VoIP network can be completely processed by voice-enabled routers.
您可能感興趣的試卷
你可能感興趣的試題
A.The FXS interface allows an analog connection to be directed at the public switched telephone network （PSTN’s） central office.
B.The FXS interface connects directly to a standard telephone，fax machine，or similar device and supplies ring，voltage，and dial tone.
C.The FXS interface connects directly to an IP phone and supplies ring，voltage，and dial tone.
D.The FXS interface connects directly to ISDN voice channels.
A.Standard encoding techniques create an uncompressed digital data rate of 4000 bps.
B.Standard encoding techniques create an uncompressed digital data rate of 8000 bps.
C.Standard encoding techniques create an uncompressed digital data rate of 64，000 bps.
D.Voice quality is not a concern if compression is not used.
E.Two methods of quantization are linear and logarithmic.
F.Two methods of compression are u-law and a-law.
A.The three required steps in the analog to digital conversion are sampling，encoding，and compression.
B.The three required steps in the analog to digital conversion are sampling，quantization，and compression.
C.The three required steps in the analog to digital conversion are sampling，quantization，and encoding.
D.The output of the sampling process is a pulse code modulation （PCM） signal.
E.The output of the sampling process is a pulse amplitude modulation （PAM） signal.
A.Cisco AutoQoS can be used repeatedly to apply a single QoS policy to multiple interfaces.
B.Cisco AutoQoS includes an optional web-based GUI for automating the configuration of QoS services.
C.Cisco AutoQoS provides capabilities to automate VoIP deployments.
D.The auto qos global configuration command is used to configure Cisco AutoQoS.
E.The Modular QoS CLI （MQC） is the best way to fine tune QoS configurations.
F.The SDM QoS wizard is the fastest way to implement QoS.
A.DiffServ requires RSVP to set up a path through the network to accommodate the requested QoS.
B.Network traffic is identified by class， and the level of service is chosen for each class.
C.The DiffServ model relies on a fairly simple mechanism to provide QoS over a wide range of equipment.
D.RSVP enables the DiffServ model to provide end-to-end QoS.
E.The DiffServ model is more scalable than the IntServ model.
F.The flow-based approach of the DiffServ model is ideal for large scalable implementations such as the public Internet.
A.AutoQos Enterprise
B.AutoQoS Campus
C.AutoQoS VoIP
D.AutoQoS LAN
A.CBWFQ
B.LLQ
C.traffic shaping
D.WRED
A.policy routing
B.increase link capacity
C.WRED
D.CBWFQ
E.LFI
F.WFQ
A.The customer uses SNMP statistics to create the policy.
B.QoS policy templates are generated and installed on the interface.
C.RTP is used to generate the policy.
D.LLQ，cRTP，and LFI are used to automatically discover the policy.
E.The auto-generated policy is manually optimized before implementation.
F.Auto-discovery is used to determine what traffic is on the interface.
A.WPA is based on the outdated IEEE 802.11i standard.
B.WPA uses RSN，which uses the same base encryption algorithm as RC4.
C.WPA requires a hardware upgrade that may not be supported by all vendors.
D.WPA uses TKIP，which uses the same base encryption algorithm as WEP.
E.WPA is susceptible to a DoS attack when it receives two packets in quick succession with bad MICs，forcing the AP to shut down the entire Basic Service Set （BSS） for one minute.
F.WPA is susceptible to a security weakness when preshared keys are used.
最新試題
Which three practices are important to the implementation of a DiffServ QoS architecture？（）
Which two statements are correct about the signaling methods that are utilized for transmitting voice？ （）
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）
What is an advantage of the IntServ QoS model？（）
In a VoIP network， which type of interface would an analog fax machine connect to？（）
Which three user interfaces exist for the Cisco WLAN Controllers？（）
Which of the items stated is typically the most expensive method of improving QoS across WAN links？（）
The Cisco SDM will create a QoS policy that provides services to two types of traffic. Which two statements indicate the default QoS parameters that are created by SDM？（）
Which set of classes correctly identifies the four traffic classes， from highest priority to lowest priority， specified in the 802.11e standard？（）
SDM creates a low latency queuing （LLQ） service policy with its associated classes. What are the two types of low latency queuing available using the SDM QoS wizard？（）