A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering， with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
您可能感興趣的試卷
你可能感興趣的試題
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001：DB8：：1
D.2001：DB8：ABCD：FEEF：：1
A.excessive collisions
B.FCS errors
C.runts
D.late collisions
A.BPDUs that enter a blocking port are discarded.
B.BPDUs that enter a blocking port are processed.
C.Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
D.BPDUs are only processed on forwarding ports.
A.The CBWFQ scheduler provides a guaranteed minimum amount of bandwidth to each class.
B.CBWFQ services each class queue using a strict priority scheduler.
C.The class-default queue only supports WFQ.
D.Inside a class queue， processing is always FIFO， except for the class-default queue.
A.It is a function used by routing protocols to install routes into routing table
B.It is a function that prevents the advertising of routes over an interface that the router is usingto reach a route
C.Its function is to help avoid routing loops.
D.It is a redistribution technique used by routing protocols
A.An update packet with init flag set from a known， already established neighbor relationship was received by one of the routers.
B.The counters were deleted.
C.The ARP cache was removed.
D.The IP EIGRP neighbor relationship was cleared manually.
A.Area 0
B.NSSA
C.Totally stubby
D.Stub
最新試題
What is the STP root guard feature designed to prevent？（）
In GLBP， which router will answer on client ARP requests？（）
Internet Protocol version 6 （IPv6） is the next-generation Internet Layer protocol for packet-switched internetworks and the Internet. IPv6 router solicitation is（）
Phase I and Phase II DMVPN differ in terms of which of these characteristics？（）
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured， which parameter determines the winner？（）
What does the OSPF command capability vrf-lite achieve？（）
Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）
Which two attributes need to match for two switches to become members of the same MST region？ （）
For the following ports， which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge？（）
Which IOS security feature is configured by the ip inspect inspection-name {in out} command？（）