A.aggregation congestion occurring at the core layer where the different distribution layer devices feed traffic to the core-layer switches
B.speed mismatches when moving from a low-speed LAN environment to a higher speed WAN environment
C.flapping Ethernet interfaces caused by misconfigured LAN interfaces
D.flapping serial interfaces caused by misconfigured WAN interfaces
E.speed mismatches when moving from a high-speed LAN environment to a lower speed WAN environment
您可能感興趣的試卷
你可能感興趣的試題
A.over leased lines, use the multilink ppp command to reduce latency and jitter, and to create Distributed Link Fragmentation and interleaving
B.use the service-policy command to attach a traffic flow to an interface on the router
C.use the ip rsvp bandwidth command to set a strict upper limit on the bandwidth NBAR uses, and to guarantee admission of any flows
D.use the policy-map command to define one or more QoS policies (such as shaping, policing, and so on) to apply to traffic defined by a class map
E.use the random-detect dscp command to modify the default minimum and maximum thresholds for the DSCP value
F.use the class-map command to define one or more traffic classes by specifying the criteria by which traffic is classified
Refer to the exhibit. The serial link that connects the two offices has a bandwidth of 128 kbps.What could be done to set aside 64 kbps of bandwidth to transport VoIP traffic over the WAN link?()
A.apply the clock rate 64000 command on both serial interfaces connected to the WAN link
B.apply the bandwidth 64 command on both serial interfaces connected to the WAN link
C.apply the frame-relay voice-bandwidth 64000 command to enable the QoS Call Admission Control feature on the serial link
D.apply the max-conn 64 command on a perial peer basis on both sides of the serial link
E.apply the ip bandwidth-percent eigrp 1 64 command on both sides of the serial link
F.apply the auto-cost reference-bandwidth 64 command on both sides of the serial link
A.the DiffServ model requires applications to signal the network with QoS requirements
B.the DiffServ model can be used to deliver QoS based upon IP precedence, or source and destination addresses
C.the DiffServ model requires RSVP
D.the best effort model is suitable for applications such as file transfer and e-mail
E.the IntServ model requires applications to signal the network with QoS requirements
F.the IntServ model model attempts to deliver a level of service based on the QoS specified by each packet
A.centralized management for autonomous access points
B.centralized management for lightweight access points
C.centralized management that requires an external AAA server
D.centralized management with integrated AAA server
E.integration with the Location Appliance to expand real time tracking to 1500 devices for 30 days
F.integration with the Location Appliance to expand real time tracking to 2500 devices for 30 days
A.all Wi-Fi devices on the WLAN send directly received signal strength indication (RSSI) information to the Cisco Wireless Location Appliance through SNMP
B.an AP collects RSSI information which is forwarded to wireless controllers through LWAPP. Wireless controllers forward aggregated RSSI to the location appliance through SNMP
C.the APs collect received signal strength indication (RSSI) information from all Wi-Fi devices and forward the information to the Cisco Wireless Location Appliance through the LWAPP
D.the Cisco WLAN controllers bypass the received signal strength indication (RSSI) information from all Wi-Fi devices to the Cisco Wireless Location Appliance through the LWAPP
A.AutoQoS can be configured from a different subinterface if the DLCI is already assigned to one subinterface
B.Multilink PPP (MLP) over Frame Relay must be manually configured on low speed DLCIs
C.for low-speed Frame Relay DLCIs with Frame Relay-to ATM interworking, the AutoQoS cannot be configured if a virtual template is already configured for the DLCI
D.AutoQoS can be configured on a Frame Relay DLCI only if a map class is attached to the DLCI
Refer to the exhibit. What type of interface will connect the voice gateway router R1 to the analog phone and the fax machine?()
A.the analog phone will be connected to the FXS port, and the fax machine will be connected to the FXO port on router R1
B.the analog phone will be connected to the FXO port, and the fax machine will be connected to the FXS port on router R1
C.both devices will be connected to the FXS port on router R1
D.both devices will be connected to the FXO port on router R1
E.both devices will be connected to the E and M ports on router R1
A.voice gateways with analog interfaces need a gatekeeper to convert analog signals into digital format before voice is encapsulated into IP packets
B.voice gateways need a gatekeeper to interconnect the VoIP networks the PSTN network
C.voice gateways with Cisco Unified CallManager Express (CME) can permanently act as a call agent for IP phones
D.voice gateways equipped with a DSP module can take the role of the call agent during WAN failure.
A.in global configuration mode, apply the service policy and use the qos pre-classify
B.in global configuration mode, apply the service policy but do not use the qos pre-classify command
C.apply the service policy on the physical interface but do not use the qos pre-classify
D.apply the service policy on the tunnel interface but do not use the qos pre-classify command
E.apply the service policy on the tunnel interface and use the qos pre-classify command
A.business-critical
B.high priority
C.middle class
D.voice
E.best effort
F.scavenger
最新試題
End-to-end QoS is maintained in the Cisco WLAN deployment model by utilizing what parameter in lieu of 802.1p?()
When deploying a Cisco Wireless Control System (WCS) with the 2700 series location appliance, to within what range is on-demand location of rogue APs possible?()
SDM creates a low latency queuing (LLQ) service policy with its associated classes. What are the two types of low latency queuing available using the SDM QoS wizard?()
Within the WMM policy, how many default QoS radio access categories are there?()
Which two VoIP capabilities are utilized when the CallManager and the gateway are configured for Survivable Remote Site Telephony?()
When QoS levels in the Cisco Wireless Control System (WCS) are entered, which profile names are used to identify the access categories?()
Which two statements about the Wi-Fi Multimedia (WMM) standard are true?()
Which three functions can an Integrated Services Router perform in a VoIP network?()
What can be used to maintain the voice quality on a link by limiting the number of calls that can be active at any given time?()
What is an advantage of the IntServ QoS model?()