A.Two LSAs will exist in the network for this destination， and both will be used
B.Two LSAs will exist in the network for this destination， but only the one generated by the highest RID ASBR will be used
C.Only the LSA generated by the highest RID ASBR will exist in the network
D.Only the LSA generated by the lowest RID ASBR will exist in the network
您可能感興趣的試卷
你可能感興趣的試題
A.standby 1 priority 110
B.standby 1 priority 120
C.standby 1 priority 130
D.standby 1 priority 110 preempt
E.standby 1 priority 120 preempt
F.standby 1 priority 130 preempt
A.A sham-link is created between any twoo VPN sites that belong to the same OSPF area and share an OSPF backdoor link
B.A sham-link is seen as an intra-area link between PE routers，an OSPF adjacency is created and data base is exchanged
C.A SHAM link is created between two directly connected PE routers so that it is preferred over the low speed backdoor door
D.A SHAM link is part of OSPF network of MPLS-VPN provider
A.AS numbers are assigned by the IANA
B.AS numbers are used by BGP （Border Gateway protocol ） to exchange IP routing information with neighboring AS
C.In the internet， an Autonomous System （AS） is a collection of IP networks and routers under the control
D.All of the Above
A.show tag-switching tdp binding 1.1.1.0/24
B.show tag-switching tdp bindings neighbor 1.1.1.0
C.show tag-switching interface e0/0
D.A and B both will show the binding.
E.All of the above.
A.LLQ supports the addition of strict priority queuing
B.With LLQ， bandwidth allocations for the priority queue and all the CBWFQ queues areconfigured using the priority command
C.LLQ is configured using MQC and CBWFQ is configured using the fair-queue command
D.LLQ priority queue bandwidth is policed with a congestion aware policer
E.LLQ does not support WFQ on the default traffic class （class-default）
A.Dynamic address mapping uses Frame Relay Inverse ARP to request the next-hop protocol address for a specific connection on its known DLCI
B.Responses to Inverse ARP requests are entered in an address-to-DLCI mapping table on the router or access server which is used to supply the next-hop protoco address or the DLCI for outgoing traffic
C.Inverse ARP is enabled by default for all protocols enabled on the physical interface
D.Inverse ARP is configured using the following command under the Interface configuration ’frame-relaymap dlci （dlci number） protocol protocol-address’
E.Inverse ARP in Frame-Relay is synonymous of ARP in Ethernet
A.additive
B.none
C.no-export
D.no-advertise
E.local-as
A.When you want to drop excess traffic above the CIR
B.When there is a speed mismatch between the central site and the remote site
C.When using Frame Relay SVCs
D.When over-subscribing the central site link
E.When LLQ is implemented on the Frame Relay PVC
F.When Multilink PPP LFI is implemented on the Frame Relay PVC
A.Show mpls forwading-table
B.Show mpls ldp bindings
C.Show mpls ldp neighbor detail
D.Show mpls ldp parameters
E.Show mpls ldp discovery
A.Cell relay
B.aal5
C.Ethernet VLAN
D.Frame Relay
E.HDLC
F.PPP
最新試題
Which of the following is used to periodically multicast by DIS on a LAN to ensure IS-IS link state databaseaccuracy？（）
There are two cabling schemes to choose from when implementing a Cisco CRS-1 multishelf system：single-module cabling and multimodule cabling. What is the maximum capacity of the LCCs that aresupported in multimodule cabling？（）
Which two statements about 10 Gigabit Ethernet （10GE） are true？（）
Assume that the PEs are separated by Multiple P routers.How many labels should the ingress PE push for BPE functionality？（）
Which information is carried in the OSPFv3 intra-area Prefix LSA？（）
Which two statements about Layer 3 MPLS VPN are true？（）
Which statement about implementing the Cisco IPv6 provider Edge Router over MPLS is true？（）
Which two statements about DS-Lite are true？（）
What are three common reasons for ATM CRC errors？（）
Which statement about VPLS is true？（）