A.multipart-to-multipoint EVC （E-LAN）
B.hub spoke EVC （E-Tree）
C.point to point EVC （E-Line）
D.rooted multipoint EVC （E-Tree）
E.point-to-multipoint EVC （E-Tree）
您可能感興趣的試卷
你可能感興趣的試題
A.MPLS TE supports admission control
B.MPLS TE tunnel traffic is a link attribute to compute the TE tunnel path
C.MPLS TE uses BGP extension to advertise link attributes
D.MPLS TE provides protection capability
E.MPLS TE uses RSVP to establish LSP
A.Allows the transportation of all forms of traffic
B.Multiplexing is easy
C.Clocks do not need to be synchronized
D.Reduces network complexity and cost
E.Padding is not necessary and not permitted
A.It is mainly used in Intra-AS MPLS VPLS deployments and is configured at the ASBR to avoid misconfiguration of the Route Target assignment for VPN configurations
B.It is mainly used in Inter-AS MPLS VPN deployments and is configured at the ASBR to avoid misconfiguration of the Route Target assignment for VPN configurations
C.It is mainly used in Intra-AS MPLS VPLS deployments and is configured at the Router Reflectorto avoid misconfiguration in Route Target assignment for VPN configurations
D.It is mainly used in Inter-AS MPLS VPLS deployments and is configured at the Router Reflectorto avoid misconfiguration of the Route Target assignment for VPN configurations
E.It is mainly used in Inter-AS MPLS VPLS deployments and is configured at the PE router to avoid to misconfiguration of the Route Target assignment for VPN configurations
A.Routing information received through an IBGP session is not forwarded to another IBGP neighbor， onlyto EBGP neighbors
B.Routing information received through an EBGP session is not forwarded to another EBGP neighbor，only to IBGP neighbors
C.BGP neighbor peerings are established and sychronized using the TCP 3-way handshake
D.BGP shall not advertise a route until that route has been learned via an IGP also
A.10 Gigabit Ethernet does not support VLAN definition
B.10 Gigabit Ethernet supports full duplex links， but does not support half duplex links
C.10 Gigabit Ethernet supports unshielded or shielded twisted-pair cable connections
D.10 Gigabit Ethernet supports Carrier Sense Multiple Access with Collision Detection （CSMA/CD）
E.10 Gigabit Ethernet supports optical fiber connections in single mode only. Mufti mode is not supported
A.IGP and RSVP
B.EBGPv4 with a sending community
C.IGP and EBGPv4
D.IGP and LDP
E.EBGPv4 with a sending label
A.hub and spoke
B.PE
C.CE
D.hub
E.spoke
A.privilege-level configuration
B.fabric cards
C.SNMP traps
D.admin- level configuration
E.exec- level configuration
A.All CE devices emulate a bridge
B.All provider devices emulate a bridge
C.Hierarchical VPLS reduces signaling overhead
D.Each PE device emulates a bridge
E.Each CE device emulates a bridge
A.TCP
B.UDP
C.HTTP
D.Multicast
最新試題
Which three things are the building blocks of the Cisco VPLS architecture？（）
Which option describes a benefits of IPv6 VPN Provider Edge？（）
There are two cabling schemes to choose from when implementing a Cisco CRS-1 multishelf system：single-module cabling and multimodule cabling. What is the maximum capacity of the LCCs that aresupported in multimodule cabling？（）
Which three are advantages of SONET？（）
Which Modular QoS CLI （MQC） based output queuing method is designed to support multiple trafficclasses including VoIP traffic， mission-critical traffic， interactive traffic， and default class traffic？（）
Assume that the PEs are separated by Multiple P routers.How many labels should the ingress PE push for BPE functionality？（）
Which information is carried in the OSPFv3 intra-area Prefix LSA？（）
Which statement about the use of Route Target Rewrite is true？（）
In the Carrier Supporting Carrier （CsC） feature， which two protocols run between CSC-PE and CSC-CE（）.
Which two statements about Layer 3 MPLS VPN are true？（）