A. To support fault and policy reporting， the WLSE requires a Wireless Control System （WCS）.
B. When WLSE detects an AP failure， it automatically increases the power and cell coverage of nearby APs.
C. WLSE requires the 2700 location appliance to offer location tracking.
D. WLSE can locate rogue APs and automatically shut them down.
E. WLSE configuration is done using the command line interface （CLI） or a WEB based template.
您可能感興趣的試卷
你可能感興趣的試題
A. Business-critical traffic includes VoIP and voice signaling packets.
B. SDM can be used to configure a basic QoS policy for incoming traffic on WAN interfaces and IPsec tunnels.
C. SDM can provide QoS for real-time traffic and business-critical traffic.
D. SDM creates a custom-queuing （CQ） or a priority-queuing （PQ） policy.
E. SDM creates a low latency queuing （LLQ） service policy with its associated classes.
F. When allocating bandwidth， values can be entered in either bandwidth percentage or kilobytes per second （kBps）.
A.call agent
B.IP phone
C.multipoint control unit
D.gatekeeper
A.control plane policing
B.data plane policing
C.network-based application recognition （NBAR）
D.service plane policing
E.management plane policing
Refer to the exhibit. What is the maximum available bandwidth for the path between the workstation and the server？（）
A.256 kb/S
B.512 kb/s
C.1 Mb/s
D.10 Mb/S
E.100 Mb/S
F.110.768 Mb/S
Refer to the exhibit. Which statement is true about the function of the frame-relay voice-bandwidth 24000 command that is shown in the partial configuration？（）
A.It limits the total bandwidth available on the Frame Relay link.
B.It provides call admission control by limiting the number of voice calls over the Frame Relay link
C.It sets up IP RTP Priority features that reserve bandwidth for voice traffic flows.
D.It is functionally equivalent to configuring LLO.
E.It limits the bandwidth that is taken by individual voice calls to 24000 b/s.
A.Cisco Express Forwarding （CEF） must be globally enabled.
B.Prior to the enabling of the Cisco AutoOoS feature， the bandwidth command must be applied on all interfaces or subinterfaces.
C.After the enabling of the Cisco AutoOoS feature， the bandwidth command must be applied on all interfaces or subinterfaces .
D.OoS policies must be enabled on all interfaces that will participate in the AutoOoS configuration.
E.An IP address must be configured on all low-bandwidth interfaces （768 kb/s or lower） that will participate in the AutoOoS configuration
F.An IP address must be configured on all interfaces that will participate in the AutoOoS configuration
A.codec
B.link speed
C.Layer 2 encapsulation
D.packet overhead （IP/UDP/RTP）
E.link delay
F.total number of simultaneous calls that are allowed
A.The gateway voice-capable device is configured to support call control directly performing call setup， call maintenance， and call teardown
B.The gateway voice-capable device has a local call routing table configured through a routing protocol.
C.The gateway voice-capable device relies on a call agent to support call control.
D.The gateway voice-capable device relies on a gatekeeper to support call setup， call maintenance， and call teardown.
A.CoS 0 = Best-Effort Data
B.CoS 1 = Best-Effort Data
C.CoS 3 = High Priority
D.CoS 4 = High Priority Data
E.CoS 5 = Voice Bearer
F.CoS 7 = Voice Bearer
A.incoming interface
B.Layer 2 differentiated services code point （DSCP）
C.Layer 3 IP precedence
D.outgoing interface
最新試題
When deploying a Cisco Wireless Control System （WCS） with the 2700 series location appliance， to within what range is on-demand location of rogue APs possible？（）
Which statement is true about the Call Admission Control （CAC） feature in VoIP networks？（）
Which two statements are true about Voice over IP （VoIP） packet delivery in a digital infrastructure？ （）
What can be used to maintain the voice quality on a link by limiting the number of calls that can be active at any given time？（）
Which two functions can be provided by an Integrated Services Router （ISR） in a VoIP network？（）
Which two statements are correct about the signaling methods that are utilized for transmitting voice？ （）
What are three factors used to determine the amount of bandwidth that is required for a single VoIP call？ （）
Which of the items stated is typically the most expensive method of improving QoS across WAN links？（）
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）
What are two ways to minimize the delay of VoIP packets that are traversing a network？ （）