A.The 172.16.1.1 neighbor is down.
B.The prefix 10.10.10.0/24is not a’connected’route.
C.This route is not a BGP learned route.
D.The network command is wrong.
E.None of the other alternatives apply
您可能感興趣的試卷
你可能感興趣的試題
A.The neighboring router stops receiving ACK packets from this router
B.The neighboring router starts receiving route updates from this router
C.The neighboring router is too busy to answer the query (generally caused by high CPUutilization)
D.The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet
A、The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast application
B、The last 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
C、To calculate the Layer 2 multicast address, the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0
D、The first 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
A.show ip ospf
B.show ip route
C.show ip protocols
D.show ip ospf database
E.None of the other alternatives apply
A.Layer 5
B.Layer 4
C.Layer 3
D.Layer 2
E.Layer 1
A.show ip protocol
B.show ip route
C.show ip ospfinterface
D.show ip ospf
E.show ip nterface
F.None of the other alternatives apply
A.show ip ospf
B.show ip protocols
C.show ip ospfneighbor
D.show ip ospfinterface
A.show ip protocols
B.show running-config
C.show ip ospfneighbor
D.show ip ospfborder-routers
A.show ip ospf
B.show ip route
C.show ip protocol
D.show ip ospfdatabase
E.None of the other alternatives apply
A.Each router has an identical link state database.
B.External routes are imported into a separate link state database.
C.Syn chronization of link state databases is maintained via floodingo f LSAs.
D.Information in the link state database is used to build a routing table by calculating a shortest-path tree.
E.By default,link state databases are refreshede very 10 minutes in the absence of topology changes.
最新試題
A new router was configured with the following commands:The configuration above was found on an Internet Service Provider’s (ISP) Multiprotocol LabelSwitching (MPLS) network. What is its purpose?()
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password?()
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.(Not all options will be used)
Study the exhibit carefully.Routers A and B are customer routers. Routers 1, 2, 3 and 4 are provider routers. The routers areoperating with various IOS versions. Which frame mode MPLS configuration statement is true?()
As a network engineer, study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem?()
In computer security, AAA stands for authentication, authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct?()
Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()
Match the xDSL type on the above to the most appropriate implementation on the below.
Which three statements accurately describe IOS Firewall configurations?()
cisco ios command to interface dialer 0