A. a higher fan-out ratio
B. fully redundant switches
C. 100 percent port efficiency
D.allI S Lscontained with inasingle chass is
E.higher latency and through put than acore-edged esign switch

A.IVR
B.VoQ
C.FSPF
D.VSANs
E.SANTap

A.ISL
B.IVR
C.VoQ
D.VSANs
E.EnhancedISL

A. It operates much like TCP.
B. Flow control is only provided by QoS.
C. It must be implemented in an arbitrated loop.
D. Communication methods are similar to those of an Ethernet bus.
E. N_Port to N_Port connections use logical node connection points.

A. supports multiple protocols
B. works only in a shared or loop environment
C. allows addressing for up to 4 million nodes
D. allows addressing for up to 8 million nodes
E. provides a high speed transport for SCSI payloads
F. may stretch to a distance of up to100 km before needing extenders

A. Data is accessed using NFS or CIFS.
B. Data is accessed at the block level.
C. NAS is referred to as captive storage.
D. Storage devices can be shared between users.
E. A NAS implementation is not as fast as a DAS implementation.

A. Create a class that inherits HtmlTextWriter and that can emit the new markup.
B. Create a class that inherits StreamWriter and that can emit the new markup.
C. Reference the class in the <capabilities> element of the new device's browser definition file.
D. Reference the class in the <controlAdapters> element of the new device's browser definition file.

A. The access layer is the first oversubscription point in a data center design.
B. When using a Layer 2 loop-free design, VLANs are extended into the aggregation layer.
C. When using a Layer 2 looped design, VLANs are not extended into the aggregation layer.
D. When using a Layer 3 design,stateful services requiring Layer 2 connectivity are provisioned from the aggregation layer.
E. The data center access layer provides the physical-level connections to the server resources and only operates at Layer 3.

A. Partitioning of network resources is enabled.
B. VRFs cannot support path isolation from MAN/WAN designs.
C. VRFs cannot be used to map a virtualized data center to a MPLS implementation.
D. VRFs do not allow for the use of application services with multiple access topologies.
E. An access design using a VRF allows for an aggregation layer service module solution.

A. Troubleshooting is more complicated.
B. Service and switch modules are underutilized.
C. Layer 2 adjacency is required with the servers that use this design.
D. Layer 3 adjacency is required with the servers that use this design.
E. Load balancing will always occur across both access layer uplinks.