A.19dBm
B.67dBm
C.10dBm
D.86dBm
E.5dbm to 10dBm
您可能感興趣的試卷
你可能感興趣的試題
A.5；10%
B.10；15%
C.15；20%
D.20；25%
A.3
B.4
C.11
D.13
E.14
A. signal strength 46dBm, noise level 95dBm
B. signal strength 74dBm, noise level 94dBm
C. signal strength 68dBm, noise level 79dBm
D. signal strength 50dBm, noise level 56dBm
A.0.1%
B.1%
C.2.5%
D.25%
A. cell phones
B. remote access
C. mobility services
D. network management
E. network unification
F. network decentralization
A.50
B.100
C.150
D.200
E.250
A. It should be implemented in a management VLAN.
B. Its connection to managed devices should be over a data VLAN.
C. It is made up of Cisco Security MARS and Clean Access software.
D. It should be deployed as close to the edge of the network as possible.
E. It delivers policy administration and enforcement for the Cisco Self-Defending Network.
A. secure tunnels
B. a separate management VLAN
C. secure VLANs to isolate sensors
D. an out-of-band path around the firewall
E. asymmetric traffic flows to isolate sensors
F. private VLANs to put all sensors on isolated ports
A. bridging VLANs on two switches
B. bridging two VLANs on one switch
C. between two Layer 2 devices withtrunking
D. between two Layer 2 devices withouttrunking
E. between a Layer 2 device and a Layer 3 device withtrunking
A. only operational in routed mode
B. only operational in transparent mode
C. only eight interfaces can belong to an asymmetric routing group
D. operational in both failover and non-failover configurations
E. only operational when the firewall has been configured for failover
最新試題
You are the Cisco Network Designer . Which is not major scaling, sizing, and performance consideration for an IPsec design?（）
Please match the Cisco STP enahancement term to its definition.（）(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
What amount of cell overlap ensures smooth roaming for wireless endpoints?（）
One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?（）
Cisco Express Forwarding (CEF) is mainly used to increase packet switching speed, reducing the overhead and delays introduced by other routing techniques, increasing overall performance.Which of the following concerning CEF is recommended by Cisco?（）
You are the Cisco Network Designer. Which of these is least important when determining how many users a NAS can support?（）
Which of the following is the primary consideration to scale VPNs?（）
Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology?（）
In which NAS operating mode are ACL filtering and bandwidth throttling only provided during posture assessment?（）
As an experienced technician, you are responsible for Technical Support. One of the trainees is asking your advice on VPN Termination Device and Firewall Placement. Which of the following approaches will you recommend?（）