單項選擇題

While verifying BGP operation on the Company router, you issue the "show ip bgp" command asshown below:

From the information above, which path will the network 143.16.0.0 prefer to take to exit the AS?()

A.128.214.63.2
B.192.208.10.5
C.128.213.63.5
D.203.250.13.41
E.All of the above will be used in a round robin fashion


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible. To gain access to either thetopology or the SDM, click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDM, you can return to yourquestions by clicking on the Questions button to the left.

Off Shore Industries is a large worldwide sailing charter. The company has recently upgraded itsInternet connectivity. As a recent addition to the network engineering team, you have been taskedwith documenting the active Firewall configurations on the Annapolis router using the Cisco Routerand Security Device Manager (SDM) utility. Using the SDM output from Firewall and ACL Tasksunder the Configure tab, answer the following questions:
Which two options would be correct for a permissible incoming TCP packet on an untrustedinterface in this configuration?()

A.The packet has a source address of 172.16.29.12
B.The packet has a source address of 10.94.61.29
C.The session originated from a trusted interface
D.The application is not specified within the inspection rule SDM_LOW
E.The packet has a source address of 198.133.219.144

2.單項選擇題Which of the following is not considered a common approach to narrow the field of potential problem causes()

A.Following the traffic path
B.Top-down
C.Comparing configurations
D.Bottom-up
E.Divide and conquer
F.ExamineS LAs

3.多項選擇題

Which two of the following descriptions are correct according to the displayed output of thecommand show ip bgp summary?()

A.The BGP session to the 10.1.1.1 neighbor is established
B.The router is trying to create a BGP peering session with the 10.1.1.1 neighbor
C.The BGP session to the 10.3.3.3 neighbor is created, but the router received no BGP routingupdates from the 10.3.3.3 neighbor
D.The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor

4.單項選擇題Which of the following topology situations would be a qood candidate for configuring DMVPN()

A.Extranet VPN
B.Managed overlay VPN topology
C.Hub-and-spoke VPN topology
D.Central-site VPN topology
E.Full mesh VPN topology
F.Remote-access VPN topology

5.多項選擇題Which of the following is not an essential prerequisite for AutoQoS to be correctly applied to an interface()

A.The interface must be configured as a Multilink PPP interface.
B.The correct bandwidth should be configured on the interface.
C.A QoS policy must not be currently attached to the interface.
D.CEF must be enable
E.AutoQoS must be enabled globally before it can be enabled on the interface.
F.An IP address must be configured on the interface if its speed is equal to or less than 768 kbps.

6.單項選擇題Which IOS command would you enter if you wanted to view a list of IBGP and EBGP neighborrelationships that are configured?()

A.show ip bgp
B.show ip bgp paths
C.show ip bgp peers
D.show ip bgp summary
E.show ip bgp protocols

8.單項選擇題Which IOS command would you use to find out which networks are routed by a particular OSPFprocess?()

A.show ospf
B.show ip route
C.show ip protocols
D.show ip ospf database
E.None of the other alternatives apply

9.單項選擇題

Exhibit:

You work as a network technician. You trainee shows you the IOS command output displayed inthe exhibit. What command did Tess use to produce this output?()

A.show ip RIP
B.show ipv6 ospf
C.show ip ospf
D.show ip ospf interface
E.show ipv6 ospf interface
F.show ipv4 ospf
G.None of the other alternatives apply

10.多項選擇題Which of the following are valid modes of accessing the data plane()

A.Serial connection
B.Secure Shell
C.RADIUS
D.Simple Network Management Protocol
E.HTTP
F.Telnet

最新試題

Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.(Not allstatements will be used)

題型:問答題

Which statement correctly describes IPsec VPN backup technology?()

題型:單項選擇題

cisco ios command to interface dialer 0

題型:問答題

As a network engineer, do you know for what purpose SDM uses Security Device Event Exchange(SDEE)?()

題型:單項選擇題

As a network engineer, study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem?()

題型:單項選擇題

Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.

題型:問答題

Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed?()

題型:單項選擇題

In computer security, AAA stands for authentication, authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct?()

題型:單項選擇題

A new router was configured with the following commands:The configuration above was found on an Internet Service Provider’s (ISP) Multiprotocol LabelSwitching (MPLS) network. What is its purpose?()

題型:單項選擇題

As a network technician, do you know what is a recommended practice for secure configurationmanagement?()

題型:單項選擇題