A.Quality of Service
B.Trunk configuration
C.Access lists
D.Routing protocol configuration
E.Power over Ethernet
F.DHCP configuration
您可能感興趣的試卷
你可能感興趣的試題
A.Create an IPv4 tunnel and assign the tunnel IPv6 addresses
B.Create IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfaces
C.IPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatible
D.Create IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfaces
E.Use an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that process
F.Create an IPv4 tunnel and use the tunnel mode ipv6ip command
A.show ip route ∣ to tftp：//192.168.1.1/route.txt
B.show ip route ∣ tee tftp：//192.168.1.1/route.txt
C.show ip route ∣ include tftp：//192.168.1.1/route.txt
D.show ip route ft include tJtp：//19Z168.1.1/route.txt
E.show ip route ∣ redirect tftp：//192.168.1.1/route.txt
A.Link-local address used for next-hop addresses
B.Interface can be added to RIP routing process in either interface configuration mode or in routerconfiguration mode
C.Uses a multicast to send routing updates
D.Use hop count as a metric
E.Distance-vector routing protocol
F.Maximum hop count is 15 with 16 being "unreachable"
A.The default-metric command configured under the appropriate interface
B.The metric parameter in the network command of a routing process
C.The metric parameter in the redistribute command
D.The default-metric command
E.A route-map containing a seed command
F.A route map containing a metric command
A.Designated port
B.Nonswitch port
C.Switch port
D.Nonroot port
E.Nondesignated port
F.Root port
A.show ip eigrp topology
B.show ip eigrp adjacency
C.show ip eigrp routes
D.show ip eigrp database
E.show ip route eigrp
F.show ip eigrp forwarding
A.255.255.255.255
B.224.0.0.6
C.FFFF：FFFF：FFFF：FFFF：FFFF：FFFF：FFF：FFF
D.FF02：：10
E.224.0.0.10
F.FF02：：5
A.Rl（config-if）#ipv6 default-information originate
B.Rl（config-router）#ipv6 rip 〈process-name〉 default-information only
C.Rl（config）#ipv6 route ：：/0 null 0
D.Rl（config-if）#ipv6 rip 〈process-name〉 default-information only
E.Rl（config-router）#ipv6 rip route ；：/0 originate
F.Rl（config-router）#aggregate-address ：：/0 summarize-routes
A.Ping 10.1.1.1 Data Pattern M
B.Ping 10.1.1.1 timeout 0
C.Ping 10.1.1.1 size 1500 df-bit
D.Ping 10.1.1.1 source loopback 0
E.Ping 10.1.1.1 size 1500
F.Ping 10.1.1.1 size 1500 Strict
A.RIP route 10.1.2.0/24
B.EIGRP route 10.1.2.0/24
C.RIP route 10.1.0.0/16
D.OSPF route 10.1.0.0/16
E.RIP route 10.0.0.0/16
F.OSPF route 10.1.2.0/24
最新試題
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Which three statements accurately describe IOS Firewall configurations？（）
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）