A.The dsl operating-mode auto command is required if the default mode has been changed
B.The ip mtu 1496 command must be applied on the dialer interface
C.The encapsulation ppp command is required
D.The ip mtu 1492 command must be applied on the dialer interface
您可能感興趣的試卷
你可能感興趣的試題
As a network engineer, study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem?()
A.On the Dialer0 interface, add the pppoe enable command
B.On the Dialer0 Interface, add the ip mtu 1496 command
C.On the ATM0/0 interface, add the dialer pool-member 1 command
D.On the ATM0/0 interface, add the dialer pool-member 0 command
Router NetworkTut is configured as shown below:
Given the above configuration, which statement is true?()
A.This device is configured as a PPPoE client
B.This device is configured as a PPPoA client
C.This device is configured as RFC 1483/2684bridge
D.This device is configured an an aggregation router
A.PPPoE with the 827 configured as a bridge
B.PPPoE with the 827 configured as the PPPoE client
C.PPPoA
D.RFC 1483 Bridged with the 827 configured as the PPPoE client
E.RFC 1482 Bridged with the 827 configured as a bridge
A.The IP inspection rule can be applied in the inbound direction on the secured interface
B.The IP inspection rule can be applied in the outbound direction on the unsecured interface
C.The ACL applied in the inbound direction on the unsecured interface should be an extendedACL.
D.For temporary openings to be created dynamically by Cisco IOS Firewall, the access-list for thereturning traffic must be a standard ACL
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed?()
A.Access-list 101 was configured for the trusted interface, and access-list 100 was configured forthe untrusted interface
B.Access-list 100 was configured for the trusted interface, and access-list 101 was configured forthe untrusted interface
C.Access-list 100 was configured for the inbound direction, and access-list 101 was configured forthe outbound direction on the trusted interface
D.Access-list 100 was configured for the inbound direction, and access-list 101 was configured forthe outbound direction on the untrusted interface
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.
Which IPSec rule is used for the Olympia branch and what does it define?()
A.102
B.116
C.127
D.IP traffic sourced from 10.10.10.0/24 destined to 10.5.15.0/24 will use the VPN
E.IP traffic sourced from 10.10.10.0/24 destined to 10.8.28.0/24 will use the VPN
F.IP traffic sourced from 10.10.10.0/24 destined to 10.5.33.0/24 will use the VPN
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible.
To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.
Which defined peer IP address an local subnet belong to Crete?()
A.peer address 192.168.55.159
B.peer address 192.168.89.192
C.peer address 192.168.195.23
D.subnet 10.5.15.0/24
E.subnet 10.7.23.0/24
F.subnet 10.4.38.0/24
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.
Which algorithm as defined by the transform set is used for providing data confidentiality whenconnected to Tyre?()
A.ESP-3DES-SHA
B.ESP-3DES-SHA1
C.ESP-3DES-SHA2
D.ESP-3DES
E.ESP-SHA-HMAC
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible.
To gain access to either the topology or the SDK click on the button to left side of the screen that Cisco 642-832: Practice Exam corresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.
Which peer authentication method and which IPSEC mode is used to connect to the branchlocations?()
A.Digital Certificate
B.Pre-Shared Key
C.Transport Mode
D.Tunnel Mode
E.GRE/IPSEC Transport Mode
F.GRE/IPSEC Tunnel Mode
You are working as a network technician, study the exhibit carefully. Your boss has informed youthat there have been problems with the WAN that is using EIGRP routing protocol. You arerequired to troubleshoot these problems.
Before going to the questions of this sim, we should have a quick review about GRE tunneling:GRE Quick Summary.
The picture below shows how to configure a GRE Tunnel between two routers, notice that the"tunnel destination" must be the IP address of the interface, not of the opposite tunnel.
Notice: The tunnel source on one router must be specified as the tunnel destination on the otherrouter.
Below are the questions of this lab-sim.
What is the reason for the ping between the HQ router and the 192.168.1.193 interface on theBranch2 router failing?()
A.The default route is missing from the Branch2 router
B.When running EIGRP over GRE tunnels, you must manually configure the neighbor addressusing the eigrp neighbor ip address command
C.The tunnel numbers for the tunnel between the HQ router and the Branch2 router do not match
D.The tunnel source is incorrect on the Branch2 router It should be serial 2/0
E.The AS number for the EIGRP process on Branch2 should be 1 and not 11
最新試題
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.(Not all options will be used)
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true?()
Match the xDSL type on the above to the most appropriate implementation on the below.
As a network engineer, do you know for what purpose SDM uses Security Device Event Exchange(SDEE)?()
cisco ios command to interface dialer 0
Drag and drop question. The upper gives the MPLS functions, the bottom describes the planes.Drag the above items to the proper location at the below
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.
As a network engineer, study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem?()
Drag and drop the xDSL type on the above to the appropriate xDSL description on the below.
Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()