A CCNA candidate is working on a 2600 Cisco router. The person needs to verify that the configuration register is set to boot the router IOS from flash memory and use the commands saved in the startup-configuration file.
Which command will display this information, and what is the configuration register value that should be displayed?（）
A. show startup-config and 0x2142
B. show version and 0x2102
C. show flash and 0x2102
D. show version and 0x2142
E. show running-config and 0x2142
F. show flash and 0x2142
您可能感興趣的試卷
你可能感興趣的試題
A. Make sure that the server can be reached across the network.
B. Check the authentication for TFTP access to the server is set.
C. Assure that the network server as adequate space for the IOS image.
D. Verify file naming and path requirements.
E. Make sure that the server can store binary files.
F. Adjust the TCP window size to speed up the transfer.
A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with:
"Would you like to enter the initial configuration dialog? [yes/no]"
Why has this occurred?（）
A. There is an error in the router DRAM.
B. Te IOS image is corrupt.
C. The configuration register is set to 0x2142.
D. The TFTP server that contains the router configuration file is unreachable.
E. A boot system configuration command has placed the router into setup mode.
A. TestKingB#reload
B. TestKingB# copy tftp startup-config
C. TestKingB# copy startup.-config running-config
D. TestKingB# copy running-config flash
E. TestKingB# setup
Exhibit: The following are true with one of the TestKing routers:
1) The IOS image in flash is missing
2) No Network connectivity is available.
3) The router fallback IOS image is corrupt.
How will this Cisco 2600 series router respond if the conditions listed in the exhibit exist during the boot process?（）
A. The router will enter setup mode.
B. The router will enter ROM monitor mode.
C. The router will enter global configuration mode.
D. The boot will hang until an IOS is available.
A. TestKingC# show memory
B. TestKingC# show startup-config
C. TestKingC# show running-config
D. TestKingC# show restart
A. ROM, Flash, NVRAM
B. ROM, TFTP server, Flash
C. Flash, TFTP server, ROM
D. Flash, NVRAM, RAM
A. Make sure that the network server can be accessed.
B. Check that the authentication for access is set.
C. Assure that the network server has adequate space for the code image.
D. Verify any file naming and path requirements.
E. Make sure that the server can load and run the bootstrap code.
A. Router# show version
B. Router# show flash
C. Router# show memory
D. Router# show buffers
E. Router# show running-config
F. All of the above
After logging into the RtrB router, you issue the "show interface" command as displayed below:
After considering the effects of the command output illustrated in the exhibit above,which of the following protocols are operational on the serial link?（）
A. PPP
B. IP
C. Compression
D. IPX
E. Multilink
F. ATX
A. Distribution channel failures
B. Feature capabilities
C. Memory capacity needs
D. Hardware product platform
E. Programming language requirements
F. Run location and compression status
最新試題
What does a configuration Register Setting of 0x2105 indicate to the Router? （）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
A Class C network address has been subnetted with a /27 mask.Which of the following addresses is a broadcast address for one of the resulting subnets?（）
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? （）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
Which of the following contribute to congestion on an Ethernet network?（）
What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?（）
Which of the following host addresses are member of networks that can be routed across the public Internet? （）
Which command is used to display the placement and direction of an IP access control list on a router?（）