You need to set up a Company AP to act as a wireless repeater.
What are three characteristics of this wireless repeater topology？（）
A. The recommended overlap of the access point on the wired LAN and the wireless repeater is 25%.
B. Autonomous access points are required.
C. The SSID of the root access point must be configured on the repeater access point.
D. The recommended overlap of the access point on the wired LAN and the wireless repeater is 50%.
E. Lightweight access points are required.
F. The recommended overlap of the access point on the wired LAN and the wireless repeater is 75%.
G. The SSID of the root access point must be distinct from that of the repeater access point.
您可能感興趣的試卷
你可能感興趣的試題
Which two features or capabilities are valid options for both an Autonomous WLAN solution and a Lightweight WLAN solution？ （）
A. PoE capability
B. Use of Cisco Secure Access Control Server （ACS） for security
C. Cisco IOS software for configuration
D. Cisco Wireless Control System （WCS） for management
E. Use of a Cisco Wireless Location Appliance location for tracking
A new Aironet 1200 series AP has been installed in the Company WLAN.
What happens when this device is connected to the LAN， with a default configuration？（）
A. The access point will attempt to download an encryption key from the nearest wireless server.
B. The access point makes several attempts to get an IP address from the DHCP server. If the access point does not receive an address， it assigns itself the IP address 10.0.0.1 for 5 minutes.
C. The access point will attempt to connect to the nearest wireless server using LEAP authentication.
D. The access point requests an IP address from the DHCP server. If the access point does not receive an address， it continues to send requests indefinitely.
E. None of the other alternatives apply
You need to determine the correct wireless LAN topology for use in the Company network.
Which three statements are true about the various WLAN topologies？（）
A. In ad hoc mode， the Independent Basic Service Set （IBSS） is a framework in which mobile clients connect directly without an intermediate access point.
B. In Infrastructure mode， the Basic Service Set （BSS） is a framework in which mobile clients use a single access point for connecting to each other or to wired network resources.
C. In Infrastructure mode， the Extended Services Set （ESS） is a framework in which two or more Basic Service Sets are connected by a common distribution system （DS）.
D. In Infrastructure mode， the Independent Basic Service Setet （IBSS） is a framework in which mobile clients connect directly without an intermediate access point.
E. In ad hoc mode， the Basic Service Set （BSS） is a framework in which mobile clients use a single AP for connecting to each other or to wired network resources.
F. In ad hoc mode， the Extended Services Set （ESS） is a framework in which two or more Basic Service Sets are connected by a common distribution system （DS）
As the Company wireless administrator， you required to be knowledgeable about the wireless LAN components.
Which two statements about these components are true？ （）
A. In the autonomous access point solution， control is provided by the WLAN controller.
B. In the lightweight access point solution， WLAN management is provided by the WLAN Control System （WCS）.
C. In the autonomous access point solution， control is provided by the WDS （Wireless Domain Services）.
D. Cisco Aironet autonomous access points cannot be supported by the Cisco Unified Wireless Network.
E. Ii the lightweight access point solution， WLAN management is provided by the WLAN Solution Engine （WLSE）.
F. Cisco Aironet lightweight access points cannot be supported by the Cisco Unified Wireless Network.
The Company wireless network is using 802.11G access points.
Which two statements are true about these access points？ （）
A. It supports eight different data rates.
B. It is fully backward compatible with 802.11b
C. It provides the same network throughput with 802.11b clients， 802.11g clients， or a mixed environment where both clients are present.
D. It is only compatibly with the 11 Mbps 802.11b transfer rate.
E. It has three non-overlapping channels in its channel options.
Refer to the exhibit.
Which two Lightweight Access Point statements are true？（）
A. An AP that has been upgraded from an autonomous AP to lightweight AP will only function in conjunction with a Cisco Wireless LAN controller.
B. LWAPP increases the amount of processing within the APs， enabling them to support filtering and policy enforcement features.
C. WLAN controllers provide a single point of management.
D. Lightweight APs require local configurations using local management.
E. Real time events such as authentication， security management， and mobility are handled by the lightweight AP.
F. Autonomous APs receive control and configuration information from a WLAN controller.
On the Company wireless LAN， A client is searching for an access point （AP）.
What is the correct process order that this Company client and access point goes through in order to create a connection？（）
A. association request/response， probe request/response， authentication request/response
B. association request/response， authentication request/response， probe request/response
C. probe request/response， authentication request/response， association request/response
D. probe request/response， association request/response， authentication request/response
E. None of the other alternatives apply
Refer to the exhibit. The signal transmitted from the AP is reflected off a wall resulting in multipath interference at the client end.
Which statement is true？ （）
A. The transmitted signal from the AP arrives at the client at slightly different times resulting in phase shifting.
B. If signal 2 is close to 360 degrees out of phase with signal 1， the result is essentially zerosignal or a dead spot in the WLAN.
C. Multipath interference is less of an issue when using a DSSS technology because multipath is frequency selective.
D. If signal 1 is in phase with signal 2， the result is essentially zerosignal or a dead spot in the WLAN.
E. Multipath interference is solved by using dual antennas.
You work as a network technician at Company. Please study the exhibit carefully. In this
Company wireless network， the LAP （lightweight access point） attempts to register to a WLC （Wireless LAN Controller）.
What kind of message is transmitted？（）
A. The lightweight access point will send Layer 2 and Layer 3 Lightweight Access Point （LWAPP） mode discovery request messages at the same time.
B. The lightweight access point will send Layer 3 Lightweight Access Point （LWAPP） mode discovery request messages only.
C. The lightweight access point will send Layer 2 Lightweight Access Point （LWAPP） mode
D.iscovery request messages. If the attempt fails， the LAP will try Layer 3 LWAPP WLC discovery. D. The lightweight access point will send Layer 2 Lightweight Access Point （LWAPP） mode discovery request messages only.
LDAP is being used throughout the Company wireless network.
Which statement about the Lightweight Access Point Protocol （LWAPP） protocol is true？（）
A. The processing of 802.11 data and management protocols and access point capabilities is distributed between a lightweight access point and a centralized WLAN controller.
B. LWAPP advertises its WDS capability and participates in electing the best WDS device for the wireless LAN.
C. LWAPP aggregates radio management forward information and sends it to a wireless LAN solution engine.
D. LWAPP authenticates all access points in the subnet and establishes a secure communication channel with each of them.
E. None of the other alternatives apply
最新試題
Which router redundancy protocol cannot be configured for interface tracking？（）
Refer to the exhibit. Which Virtual Router Redundancy Protocol （VRRP） statement is true about the roles of the master virtual router and the backup virtual router？（）
Refer to the exhibit. The command switchport mode access is issued on interface FastEthernet0/13 on switch CAT1. What will be the result？（）
DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ？ （）
Refer to the exhibit. All network links are FastEthernet. Although there is complete connectivity throughout the network， Front Line users have been complaining that they experience slower network performance when accessing the server farm than the Reception office experiences. Based on the exhibit， which two statements are true？（）
Refer to the exhibit. For what purpose is the command show ip cef used？（）
Examine the diagram. A network administrator has recently installed the above switched network using 3550s and would like to control the selection of the root bridge.Which switch should theadministrator configure as the root bridge and which configuration command must theadministrator enter to accomplish this？（）
What is the configured priority value of the Vlan105’s group on DS2 ？（）
How are STP timers and state transitions affected when a topology change occurs in an STP environment？（）
Which option correctly identifies the Cisco IOS switching methods in descending order from the fastest method to the slowest method？（）