TestKing.com is configuring the serial interface of a Cisco router to connect to the router of a new ISP. A full T1 is being used for the Internet connection. After issuing the show interface serial 0/0 command, it is observed that the interface is UP and the line protocol is DOWN.
Which of the following commands could fix this problem?（）
A. Border# copy running-config startup-config
B. Border(config)# no shutdown
C. Border(config-if)# encapsulation ppp
D. Border(config-if)# no cdp enable
E. Border(config-if)# ip routing
您可能感興趣的試卷
你可能感興趣的試題
You have just installed a new web server on the Testking network. You are required to ensure that the web server is accessible from the Internet. The network uses private addressing, so an IP-to-registered address mapping is required.To do this, you enter the following command:TestKing(config)# ip nat inside source static 192.168.2.1 198.18.1.254 You unsuccessfully try to ping the Internet from a PC host on the LAN. During the troubleshooting process, you enter the "show ip nat translations" command but the output is blank.
What is the most likely cause of the problem?（）
A. The keyword overload is missing from the command.
B. The NAT pool must be defined first.
C. An access list must be defined to create static NAT translations.
D. The interfaces must be configured for NAT.
E. None of the above
A. The IP addresses are configured incorrectly.
B. Frame Relay LMI messages not displayed in real time.
C. The administrator must issue the enable frame-relay lmi debug command.
D. The administrator must issue the terminal monitor command.
E. Debug messages can only be received once through the console port.
F. The administrator must issue the show frame-relay lmi vty 0 4 command
You are troubleshooting a WAN connection for TestKing, and on the router you execute the, "debug ppp authentication" command, and view the following output:
What kind of handshake was used for the PPP authentication?（）
A. one-way
B. two-way
C. three-way
D. No handshakes required during authentication
E. None of the above
A. Mismatched LMI types.
B. Incompatible encapsulation types.
C. Mismatching IP addresses.
D. Incorrect DLCI.
E. None of the above
The Testking Central and Remote offices are configured as shown below:
The remote router can be successfully pinged from the central office but the remote users can't access the server at the central office.Based on the output above, what do you suspect is the cause of this problem?（）
A. The Frame Relay PVC is down.
B. The IP addressing on the Central/Remote serial link is incorrect.
C. RIP routing information is not being forwarded.
D. Frame Relay inverse-ARP is not properly configured.
While troubleshooting a serial line problem, you enable ppp authentication debugging as shown below:
Based on the command output above, what type of 'handshake' was used for PPP authentication?（）
A. one-way
B. two-way
C. three-way
D. four-way
E. no handshakes required during authentication
F. None of the above
A.
B.
C.
D.
A. 0.0.0.0
B. 0.0.0.255
C. 0.0.255.255
D. 0.0.7.255
E. 0.0.3.255
F. None of the above
A. show ppp authentication
B. debug PAP authentication
C. debug PPP authentication
D. show interface serial0
E. show CHAP authentication
A. show access-list
B. show ip access-list
C. show ip interface
D. show interface
E. show interface list
最新試題
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. （）
A Class C network address has been subnetted with a /27 mask.Which of the following addresses is a broadcast address for one of the resulting subnets?（）
Which statement describes the rule of split horizon?（）
What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? （）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?（）
Which of the following host addresses are member of networks that can be routed across the public Internet? （）