Refer to the exhibit.
Which statement is true about the configuration that is shown？ （）
A. Untagged ingress traffic will be dropped.
B. Ingress traffic from the host will be tagged with theCoS value of 5.
C. Tagged and untagged ingress traffic will be carried on VLAN 1.
D. Untagged ingress traffic will be marked with the default CoS value of the port.
您可能感興趣的試卷
你可能感興趣的試題
The Company network administrator has entered the "auto qos voip cisco-phone" command on switch R1.
What does this command do？（）
A.It disables the trust boundary feature because the switch knows a Cisco IP phone is attached.
B.The switch assigns a CoS value of 5 to incoming packets.
C.If a Cisco IP phone is attached and removed， the switch continues to trust the CoS values as long as the switch is not rebooted.
D.It turns on STP to see if a Cisco IP phone is attached.
E.If a Cisco IP phone is attached， the switch trusts the CoS.
F.None of the other alternatives apply.
Refer to the exhibit.
Which three statements are true about the voice VLAN configuration of the Catalyst switch？ （）
A.The packet priority received from a device that is connected to the phone will be unmodified.
B.The packet priority received from a device that is connected to the phone will be overridden.
C.Incoming CoS values in packets from the connected phone will be left unmodified.
D.Packets without aCoS value that is set by the phone will be set to a value of 5.
E.Incoming CoS values in packets from the connected phone will be reset to a value of 5.
F.Packets without aCoS value that is set by the phone will be set to the default CoS value.
The Cisco AutoQoS feature is being used throughout the Company VOIP network.
Which three statements about this feature are true？（）
A.The "mls qos" global configuration command must be entered before configuring AutoQoS.
B.CEF must be enabled.
C.The "no auto qos voip" command is used to disable Cisco AutoQos and revoke all configurations generated by Cisco AutoQos.
D.CDP must be enabled.
E.SNMP must be enabled.
Refer to the exhibit.
What is the effect on the trust boundary of configuring the command mls qos trust cos on the switch port that is connected to the IP phone？（）
A.Effectively the trust boundary has been moved to the IP phone.
B.RTP will be used to negotiate aCoS value based upon bandwidth utilization on the link.
C.The switch is rewriting packets it receives from the IP phone and determining theCoS value.
D.The switch will no longer tag incoming voice packets and will trust the distribution layer switch to set theCoS.
E.The host is now establishing theCoS value and has effectively become the trust boundary.
Refer to the exhibit.
Which switch interface configuration command would automatically configure quality of service （QoS） for voice over IP （VoIP） within a QoS domain？ （）
A.switchport priority extend trust
B.mls qos trust
C.switchport priority extend cos 7
D.auto qos voip cisco-phone
Refer to the exhibit. A trunk link is connected between switch A_SW and switch D_SW. Based on the configuration shown in the exhibit，
how would the traffic coming from the switch A_SW be managed？（）
A.The trunk port Fa0/1 on switch A_SW will trust allCoS values on the frames coming from the IP phone.
B.The trunk port Fa0/1 on switch A_SW will trust allCoS values on the frames received on the IP phone.
C.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames coming from port Fa0/1 on A_SW.
D.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames received on the A_SW switch port Fa0/4.
E.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames received on the IP phone port.
The Company network is displayed in the following topology exhibit：
Workstation 1 traffic is set for cos 5 and the switch CompanyA sends workstation 1 traffic to the switch CompanyB. However， not all of the traffic from Switch CompanyA is from workstation 1. Switch CompanyA configurations Switch CompanyB Configuration：
mlsqos mls qos
interfacefa0/1 interface fa0/1
switchportmode trunk switchport trunk mode
switchporttrunk encapsulation dot 1q switchport trunk encapsulation dot 1q
switchporttrunk native vlan 1 switchport trunk native vlan 1
Frames from Workstation 1 are given the rightful priority through Switch CompanyA， but Switch CompanyB doesn’t reciprocate， and treats Workstation 1 frames as if they have no precedence. Which of the following actions will prioritize traffic from Workstation 1？（）
A. Configure qos all command under Switch CompanyB fa0/1 interface.
B. Configure mls qos trust cos command under Switch CompanyB fa0/1 interface.
C. Configure mls qos trust cos 5 command under Switch CompanyB fa0/1 interface.
D. Configure qos cos 5 command under Switch CompanyB fa0/1 interface.
E. Configure mls qos trust cos command under Switch CompanyA fa0/1 interface.
F. Configure qos cos 5 command under Switch CompanyA fa0/1 interface.
VOIP is being implemented in the Company network and you need to assess the need for QoS.
Which of the following network problems would indicate a need to implement QoS features？（）
A.Mis-routed packets
B.Excess jitter
C.Delay of critical traffic
D.Packet loss due to congestion
E.Data link layer broadcast storms
F.FTP connections unsuccessful
VOIP is being implemented on the Company network. In a properly designed network，
what is the maximum amount of time a voice package should spend crossing a network？ （）
A.90 milliseconds
B.120 milliseconds
C.150 milliseconds
D.240 milliseconds
Jitter is causing problems with the VOIP application in the Company network.
What causes network jitter？（）
A.Variable queue delays
B.Packet drops
C.Transmitting too many small packets
D.Compression
最新試題
What is the configured priority value of the Vlan105’s group on DS2 ？（）
What two things will occur when an edge port receives a BPDU？（）
Which three statements are true of the Link Aggregation Control Protocol （LACP）？（）
Which three statements about STP timers are true？（）
Refer to the exhibit. On the basis of the output of the show spanning-tree inconsistentports command， which statement about interfaces FastEthernet 0/1 and FastEthernet 0/2 is true？（）
How are STP timers and state transitions affected when a topology change occurs in an STP environment？（）
During routine maintenance， it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time， DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ？ （）
Refer to the exhibit. Which Virtual Router Redundancy Protocol （VRRP） statement is true about the roles of the master virtual router and the backup virtual router？（）
Refer to the exhibit. Based on the output of the show spanning-tree command， which statement is true？ （）
Refer to the exhibit. What will happen when one more user is connected to interface FastEthernet 5/1？ （）