A. In the routing table only.
B. In the neighbor table only.
C. In the topology table only.
D. In the routing table and neighbor table.
E. In the routing table and topology table.
F. In the topology table and neighbor table.
您可能感興趣的試卷
你可能感興趣的試題
A. point-to-point
B. Backbone area 0
C. Broadcast multicast
D. Non-broadcast multi-access
E. The DR/BDR process is done for all interface types
A. The update information will be added to the existing routing table.
B. The update information will replace the existing routing table entry.
C. The update will be ignored and thus no further action will occur.
D. The existing routing table entry will be purged from the routing table and all routers will attempt convergence.
A.90
B.100
C.110
D.120
E.130
F.170
G.200
A RIP router has an entry in the routing table for a specific network destination. It then gets updated with another entry for that same destination, but with a higher path cost (hop count) than the one already in the routing table.
What will the router do in this situation?（）
A. It will ignore the update and take no further action.
B. It will add the update information to its routing table.
C. It will replace the existing routing table entry with the update information.
D. It will delete the existing routing table and will send out hello packets to rebuild the routing table.
The Testking network is utilizing RIP as the IP routing protocol. Router TK1 learns how to reach the same destination via 6 different paths. All paths have the same metric and administrative distance.
With all routers using the default operation,which of the paths will be chosen to reach the destination?（）
A. Only the first two paths that are learned.
B. Four of the paths.
C. All six routes in a routed robin fashion.
D. The oldest two paths in the routing table.
E. The first path learned to the destination network.
A. Discontiguous subnets are not allowed.
B. Variable length subnet masks are allowed.
C. RIP v1 is a classless routing protocol.
D. IGRP supports classless routing within the same autonomous system.
E. RIP v2 supports classless routing.
A. Only routers can split boundaries (horizons) between concentric networks.
B. Each AS must keep routing tables converged to prevent dead routes from being advertised across boundaries.
C. Networks can only remain fully converged if all information is sent out all active interfaces.
D. Information about a route should not be sent back in the direction from which the original update came.
E. Distance vector protocols need fall back routers that are responsible for momentary loops.
A. SPF packets
B. hello packets
C. keepalive packets
D. dead interval packets
E. LSU packets
A. LSAs from other routers
B. Beacons received on point-to-point links
C. hello packets
D. Routing tables received from neighbors
E. SAP packets sent by other routers
F. TTL packets from exclusive routers
A.127.0.0.1
B.192.168.0.5
C.223.0.0.1
D.172.16.0.1
E.224.0.0.5
F.254.255.255.255.255
最新試題
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
Which characteristics are representative of a link-state routing protocol?（）
Which of the following statements regarding routed and routing protocols are true?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. （）
Which of the following describe router functions?（）
Which of the following if addresses can be assigned to host devices?（）
What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?（）
Which of the following options lists the steps in PPP session establishment in the correct order?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）