A.Cable modems only operate at Layer 1 of the OSI model.
B.Cable modems operate at Layers 1 and 2 of the OSI model.
C.Cable modems operate at Layers 1， 2， and 3 of the OSI model.
D.A function of the cable modem termination system （CMTS） is to convert the modulated signal from the cable modem into a digital signal.
E.A function of the cable modem termination system is to convert the digital data stream from the end user host into a modulated RF signal for transmission onto the cable system.
您可能感興趣的試卷
你可能感興趣的試題
A.Dead Peer Detection （DPD）
B.CDP
C.isakmp keepalives
D.GRE keepalive mechanism
E.The hello mechanism of the routing protocol across the IPsec tunnel
Refer to the exhibit. Which statement is true about the partial MPLS configuration that is shown？（）
A.The route-target both 100：2 command sets import and export route-targets for vrf2.
B.The route-target both 100：2 command changes a VPNv4 route to a IPv4 route.
C.The route-target import 100：1 command sets import route-targets routes specified by the route map.
D.The route-target import 100：1 command sets import route-targets for vrf2 that override the other route-target configuration.
Refer to the exhibit. Which statement is true about the configuration of split tunnels using SDM？（）
A.Any protected subnets that are entered represent subnets at the end user’s site that will be accessed without going through the encrypted tunnel.
B.Any protected subnets that are entered represent subnets at the end user’s site that will be accessed through the encrypted tunnel.
C.Any protected subnets that are entered represent subnets at the VPN server site that will be accessed without going through the encrypted tunnel.
D.Any protected subnets that are entered represent subnets at the VPN server site that will be accessedthrough the encrypted tunnel.
A.All passwords entered during the AutoSecure configuration must be a minimum of 8 characters in length.
B.Cisco123 would be a valid password for both the enable password and the enable secret commands.
C.The auto secure command can be used to secure the router login as well as the NTP and SSH protocols.
D.For an interactive full session of AutoSecure， the auto secure login command should be used.
E.If the SSH server was configured， the 1024 bit RSA keys are generated after the auto secure commandis enabled.
Refer to the exhibit.
What does the "26" in the first two hop outputs indicate？（）
A.the outer label used to determine the next hop
B.the IPv4 label for the destination network
C.the IPv4 label for the forwarding router
D.the IPv4 label for the destination router
A.If the VPN server is configured for Xauth， the VPN client waits for a username / password challenge.
B.The Cisco Easy VPN feature only supports transform sets that provide authentication and encryption.
C.The VPN client initiates aggressive mode （AM） if a pre-shared key is used for authentication during the IKE phase 1 process.
D.The VPN client verifies a server username/password challenge by using a AAA authentication server that supports TACACS+ or RADIUS.
E.The VPN server can only be enabled on Cisco PIX Firewalls and Cisco VPN 3000 series concentrators.
F.When connecting with a VPN client，the VPN server must be configured for ISAKMP group 1，2 or 5.
Refer to the exhibit.
Which statement about the authentication process is true？（）
A.The LIST1 list will disable authentication on the console port.
B.Because no method list is specified， the LIST1 list will not authenticate anyone on the console port.
C.All login requests will be authenticated using the group tacacs+ method.
D.All login requests will be authenticated using the local database method.
E.The default login authentication will automatically be applied to all login connections.
Refer to the exhibit. What type of security solution will be provided for the inside network？（）
A.The TCP connection that matches the defined ACL will be reset by the router if the connection does not complete the three-way handshake within the defined time period.
B.The router will reply to the TCP connection requests. If the three-way handshake completes successfully， the router will establish a TCP connection between itself and the server.
C.The TCP traffic that matches the ACL will be allowed to pass through the router and create a TCP connection with the server.
D.The router will intercept the traceroute messages. It will validate the connection requests before forwarding the packets to the inside network.
Refer to the exhibit.
What are the two options that are used to provide High Availability IPsec？（）
A.RRI
B.IPsec Backup Peerings
C.Dynamic Crypto Ma
D.HSRP
E.IPsec Stateful Switchover （SSO）
F.Dual Router Mode （DRM） IPsec
A.Cisco Express Forwarding （CEF） must be enabled as a prerequisite to running MPLS on a Cisco router.
B.Frame-mode MPLS inserts a 32-bit label between the Layer 3 and Layer 4 headers.
C.MPLS is designed for use with frame-based Layer 2 encapsulation protocols such as Frame Relay， but is not supported by ATM because of ATM fixed-length cells.
D.OSPF， EIGRP， IS-IS， RIP， and BGP can be used in the control plane.
E.The control plane is responsible for forwarding packets.
F.The two major components of MPLS include the control plane and the data plane.
最新試題
Which three statements about IOS Firewall configurations are true？（）
Refer to the exhibit.What are the two options that are used to provide High Availability IPsec？（）
Refer to the exhibit. Which statement is true about the configuration of split tunnels using SDM？（）
What are three features of the Cisco IOS Firewall feature set？（）
Which three statements about the Cisco Easy VPN feature are true？（）
Which two statements about an IDS are true？（）
Which statement describes the Authentication Proxy feature？（）
Which two statements about the Cisco AutoSecure feature are true？（）
Refer to the exhibit， which shows a PPPoA diagram and partial SOHO77 configuration.Which command needs to be applied to the SOHO77 to complete the configuration？（）
Which statement describes Reverse Route Injection （RRI）？（）