A.Class A
B.Class 1
C.Class 2
D.Class 3
E.Class 4
您可能感興趣的試卷
你可能感興趣的試題
A.5 to 10 percent for both 2.4 GHz and 5 GHz
B.10 percent for both 2.4 GHz and 5 GHz
C.20 percent for 2.4 GHz and 15 to 20 percent for 5 GHz
D.20 percent for 2.5 GHz and 10 percent for 5 GHz
A.1， 4， 7， 11
B.1， 4， 8. 11
C.1， 6， 11， 1
D.2， 4， 6， 8
A.AP1130
B.AP1242
C.AP1252
D.BR1310
A.Cisco WCS supports third-party antennas for location applications.
B.Access points that are defined with third-party antennas will not participate in rogue on-demand location tracking.
C.Cisco WCS supports third-party antenna gain， azimuth， and elevation progation patterns.
D.Access points that are defined with a third-party antenna in Cisco WCS will display coverage heat maps.
A.Max RF bandwidth is 75 percent， reserved roaming bandwidth is 6 percent.
B.Max RF bandwidth is 50 percent， reserved roaming bandwidth is 10 percent.
C.Max RF bandwidth is 50 percent， reserved roaming bandwidth is 15 percent.
D.Max RF bandwidth is 0 percent， reserved roaming bandwidth is 0.
A.NEMA area
B.plenum area
C.DAS area
D.extended area
E.RF special area
A.nowhere （but should be discussed with the customer）
B.on the site survey map and within the site survey text
C.on the customers blueprints
D.in the Cisco WCS Planning Tool
A.Signal strength （4th access point）
B.Signal strength （3rd access point）
C.Channel interference
D.Predictive physical data rate downlink （2nd access point）
A.Crowd of people
B.Office window
C.Metal door
D.Brick wall
A.The backhaul link is dynamic 1 to 54Mb/s.
B.The backhaul link is typically a fixed value.
C.The backhaul link uses DAS antennas.
D.The backhaul link uses antenna multiplexing.
E.The backhaul link does not rely on fade margin.
最新試題
Which three items does the Cisco WCS Planning Tool Generate Proposal Report provide？（）
What is a site survey best practice for location-based services？（）
In which three frequency bands does the Cisco Spectrum Expert Wi-Fi tool perform spectrumanalysis？ （）
Cisco recommends a decibel referenced to 1 milliwatt signal level for the coverage cell edge at thepredetermined data rate that is needed to support the VoWLAN device and call capacityrequirements. What is that signal level value for Cisco Unified Wireless IP Phones 7920， 7921G， and7925G？（）
A design requires 100 access points with high channel bandwidth and disabled lower data rates.How are the data rates set on the Cisco WLC and Cisco WCS？（）
By how much is a signal’s strength reduced when the signal passes through an object thatintroduces 3 dB of attenuation？（）
When conducting a wireless voice site survey， which two sizing considerations exist for thecoverage cell？（）
Which antenna generally has the narrowest first Fresnel zone in both the horizontal and verticalplanes？（）
Which format can NOT be imported into Cisco WCS Planning Tool？（）
Which three items should the site survey documentation include？（）