A.1
B.4
C.2
D.5
E.3
您可能感興趣的試卷
你可能感興趣的試題
In a deployment using the lightweight access points， clients set up to authenticate with eap-peap or eap-cisco wireless （leap） cannot authenticatE. upon inspection of the failed attempts report you see the following error： "unknown network access server nas."
What two problems can cause this type of failure？（）
A.misconfigured ip address of the aaa server on the wireless controller
B.misconfigured ip address of the wireless lan controller on the aaa server
C.misconfigured eap type on the wireless lan controller
D.misconfigured shared secret on the wireless lan controller
E.misconfigured eap type on the aaa server
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid tag data is not being collected.
On which device would you verify that rfid status has been enabled？（）
A.cisco wcs
B.access point
C.wireless controller
D.location manager
A.802.11b/g
B.radio
C.access point
D.802.11a
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. the rfid beacon rate is 10 seconds. you have discovered an issue with the rfid timeout value.
How should this value be changed？（）
A.change the value on the wireless controller to 45 seconds.
B.change the value on the wireless controller to 95 seconds.
C.change the value on the cisco wcs to 95 seconds.
D.change the value on the cisco wcs to 45 seconds.
A.frame monitoring
B.radio scan
C.self-healing
D.client walkabout
You are trying to deploy a configuration job to an ios access point using the wlse， but the job fails.
Which of the following would cause this failure？（）
A.snmp communities
B.telnet/ssh user/password
C.wlccp credentials
D.http user/password
A.3
B.1
C.4
D.6
A.psk authentication
B.eap authentication
C.wpa authentication
D.web authentication
Vlans have been enabled on an autonomous access point. in order for clients associating to vlans other than the native vlan to receive an ip address.
Which of the following must be configured？（）
A.access point ethernet port set to ssl trunking
B.switchport set to 802.1q trunking
C.switchport set to ssl trunking
D.access point ethernet port not set to 802.1q trunking
A.controller name
B.outdoor area
C.floor area
D.networks
E.mac address
F.ip address
最新試題
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode？（）
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones，which two general control settings should you select？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected toa wireless controller？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）