You are installing a cisco 4402 series wireless lan controller.
What type of interface is used on the uplink port？（）
A.1000base-x mini-gbic
B.10/100/1000 mbps rj45
C.10/100 mbps rj45
D.1000base-sx
您可能感興趣的試卷
你可能感興趣的試題
A.interference，utilization，and rf diffraction
B.clients，utilization，and multipath interference
C.noise，interference，and coverage holes
D.noise interference，and multipath interference
Static wep is configured on the access point. you are authenticated and associated to the access point but are unable to obtain an ip address.
Which of the following will cause this problem？（）
A.invalid radio type selected
B.no wep key configured on the client
C.invalid ssid configured
D.invalid wep key
An reap was supporting 16 wlans， but now it only supports one.
What happened to cause the change？（）
A.controller connectivity has been lost.
B.the access point lost its configuration.
C.the access point was rebooted.
D.an access point firmware upgrade is in progress.
A rogue access point is detected on the cisco wcs consolE. upon investigation，the access point is discovered to belong to a neighboring business.
Your administrator should designate the rogue access point as which of the following？（）
A.known internal
B.managed
C.friendly
D.known external
A.30 mw
B.100 mw
C.40 mw
D.50 mw
A.rts
B.distance（kilometers）
C.concatenation
D.cca
Your client has deployed a cisco wireless location appliance within their warehouse environment. they have been experiencing problems with tracking objects using active rfid tags. to verify proper access point deployment for location server.
The results from an access point scan should show what information？（）
A.a minimum rssi value of -50
B.rogue access points
C.a minimum of three access points
D.non-overlapping channels
A.device type and subnet
B.mac address and device type
C.serial number and version number
D.serial number and subnet
A.lost connection to the controller
B.duplicate ip address
C.startup
D.site survey mode
A.enable self-healing.
B.configure location manager.
C.conduct client walkabout.
D.conduct radio scan.
最新試題
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones，which two general control settings should you select？（）
How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected toa wireless controller？（）
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped.What may cause this problem？（）