A rogue access point is detected on the Cisco WCS console. Upon investigation， the access point isdiscovered to belong to a neighboring business.
Your administrator should designate the rogueaccess point as which of the following？（）
A.known internal
B.managed
C.friendly
D.known external
您可能感興趣的試卷
你可能感興趣的試題
A.30 mW
B.100 mW
C.40 mW
D.50 mW
A.RTS
B.distance（kilometers）
C.concatenation
D.CCA
our client has deployed a Cisco Wireless Location Appliance within their warehouse environment.They have been experiencing problems with tracking objects using active RFID tags.
To verify proper access point deployment for Location Server，the results from an access point scan should show what information？（）
A.a minimum RSSI value of -50
B.rogue access points
C.a minimum of three access points
D.non-overlapping channels
A.device type and subnet
B.MAC address and device type
C.serial number and version number
D.serial number and subnet
A.lost connection to the controller
B.duplicate IP address
C.startup
D.site survey mode
A.Enable Self-Healing.
B.Configure Location Manager.
C.Conduct Client Walkabout.
D.Conduct Radio Scan.
A.Disable Auto RF and configure manually.
B.Disable all 802.11b data rates.
C.Power access point to full power.
D.Hard code the channel.
A.Infrastructure devices to associate only to this SSID
B.Enable IP redirection on this SSID
C.Set Data Beacon Rate
D.Multiple Basic Service Set Identification （BSSID）
E.Set infrastructure SSID
A.EAP-PEAP
B.EAP-FAST
C.EAP-Cisco Wireless （LEAP）
D.EAP-TLS
E.EAP-MD5
A.15
B.10
C.1
D.5
最新試題
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode？（）
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on.Which situation would result in thistype of problem？（）
The Cisco Wireless Location Appliance provides an audit trail for each device tracked for up to how many days？（）