單項選擇題

Refer to the exhibit. What can be determined about the router from the console output?（）

A.No configuration file was found in NVRAM.
B.No configuration file was found in flash.
C.No configuration file was found in the PCMCIA card.
D.Configuration file is normal and will load in 15 seconds.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題What is the most efficient summarization that R1 can use to advertise its networks to R2（）。

A.172.1.0.0/22
B.172.1.0.0/21
C.172.1.4.0/22
D.172.1.4.0/24 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24
E.172.1.4.0/25 172.1.4.128/25 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24

2.多項選擇題Which two statements describe the Cisco implementation of VLANs? （）

A.VLAN 1 is the default Ethernet VLAN.
B.CDP advertisements are only sent on VLAN 1002.
C.By default, the management VLAN is VLAN 1005.
D.By default, the switch IP address is in VLAN 1005.
E.VLAN 1002 through 1005 are automatically created and cannot be deleted.

3.單項選擇題

The user of Host1 wants to ping the DSL modem/router at 192.168.1.254. Based on the Host1 ARP table that is shown in the exhibit, what will Host1 do（）。

A.send a unicast ARP packet to the DSL modem/router
B.send unicast ICMP packets to the DSL modem/router
C.send Layer 3 broadcast packets to which the DSL modem/router responds
D.send a Layer 2 broadcast that is received by Host2, the switch, and the DSL modem/router

4.多項選擇題What are three characteristics of the OSPF routing protocol? （）

A.It converges quickly.
B.OSPF is a classful routing protocol.
C.It uses cost to determine the best route.
D.It uses the DUAL algorithm to determine the best route.
E.OSPF routers send the complete routing table to all directly attached routers.
F.OSPF routers discover neighbors before exchanging routing information.

5.單項選擇題A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

A.Router R2 will not form a neighbor relationship with R1.
B.Router R2 will obtain a full routing table, including a default route, from R1.
C.R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.
D.R2 will not have a route for the directly connected serial network, but all other directly connected

8.多項選擇題Which two subnetworks would be included in the summarized address of 172.31.80.0 /20? （）

A.172.31.17.4 /30
B.172.31.51.16 /30
C.172.31.64.0 /18
D.172.31.80.0 /22
E.172.31.92.0 /22
F.172.31.192.0 /18

9.單項選擇題Which command can you use to manually assign a static IPV6 address to a router interface？（）

A.ipv6 address PREFIX_1：：1/64
B.ipv6 autoconfig 2001：db8：2222：7272：：72/64
C.ipv6 autoconfig
D.ipv6 address 2001：db8：2222：7272：：72/64

10.多項選擇題For what two purposes does the Ethernet protocol use physical addresses? （）

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30

最新試題

請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述？（）

題型：單項選擇題

請參見圖示。下列哪組設備僅包含中間設備？（）

題型：單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確？（）

題型：單項選擇題

請參見圖示。一臺路由器（其路由表如圖所示）收到發往192.168.1.4的數據包。路由器將如何處理該數據包？（）

題型：單項選擇題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論？（）

題型：多項選擇題

請參見圖示。在網絡中，PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序？（）

題型：單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€廣播域？（）

題型：單項選擇題

請參見圖示。公司路由器由于故障被更換。更換路由器之后，Education 辦公室內的主機C 和D 能夠相互ping 通，但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么？（）

題型：單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么？（）

題型：單項選擇題

PC 無法連接到任何遠程網站，無法ping 通其默認網關，也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常？（）

題型：單項選擇題