單項選擇題There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?()

A.Flash,TFTPserver,ROM
B.Flash,NVRAM,ROM
C.ROM,NVRAM,TFTP server
D.NVRAM,TFTP server,ROM
E.TFTP server,Flash,NVRAM


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which two statements about the use of VLANs to segment a network are true? ()

A.VLANs increase the size of collision domains.
B.VLANs allow logical grouping of users by function.
C.VLANs simplify switch administration.
D.VLANs enhance network security.

2.單項選擇題A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffiC.What is the effect of adding switch ports to a new VLAN on the switch?()

A.More collision domains will be created.
B.IP address utilization will be more efficient.
C.More bandwidth will be required than was needed previously.
D.An additional broadcast domain will be created.

3.單項選擇題Which switch would STP choose to become the root bridge in the selection process?()

A.32768:11-22-33-44-55-66
B.32768:22-33-44-55-66-77
C.32769:11-22-33-44-55-65
D.32769:22-33-44-55-66-78

4.單項選擇題A default Frame Relay WAN is classified as what type of physical network?()

A.point-to-point
B.broadcast multi-access
C.nonbroadcast multi-access
D.nonbroadcast multipoint.broadcast point-to-multipoint

6.單項選擇題The enable secret command is used to secure access to which CLI mode?()

A.user EXEC mode
B.global configuration mode
C.privileged EXEC mode
D.auxiliary setup mode

7.單項選擇題Where does routing occur within the DoD TCP/IP reference model?()

A.application
B.internet
C.network
D.transport

8.多項選擇題Which two states are the port states when RSTP has converged?()

A.blocking
B.learning
C.disabled
D.forwarding
E.listening

9.多項選擇題Which commands are required to properly configure a router to properly configure a router to run OSPFand to add network 192.168.16.0/24 to OSPF area 0?()

A.Router(config)#router ospf 1
B.Router(config)#router ospf 0
C.Router(config)#router ospf  area 0
D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
E.Router(config-router)#network 192.168.16.0 0.0.0.255 0
F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

最新試題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題

請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()

題型:單項選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()

題型:多項選擇題

請參見圖示。哪種邏輯拓撲是對圖示網絡的準確描述?()

題型:單項選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:單項選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()

題型:單項選擇題