A.you can apply multiple access lists with the same protocol or in different…
B.you can config one access list,per direction,per layer 3 protocol
C.you can placeasmanyaccess lists as you want on any interface
D.you can apply ony one access list on any interface
您可能感興趣的試卷
你可能感興趣的試題
A.neighbor table
B.SPF table
C.RTP table
D.topology table
E.query table
F.DUAL table
A.packet switching
B.access layer security
C.path selection
D.VLAN membership assignment
E.bridging between LAN segments
F.microsegmentation of broadcast domains
A.It is locally significant.
B.It is globally significant.
C.It is needed to identify a unique instance of an OSPF database.
D.It is an optional parameter required only if multiple OSPF processes are running on the router.
E.All routers in the same OSPF area must have the same process ID if they are to exchange routing information.
A.Each end of the trunk line must be set to IEEE 802.1E encapsulation.
B.The VTP management domain name of both switches must be set the same.
C.All ports on both the switches must be set as access ports.
D.One of the two switches must be configured as a VTP server.
E.A rollover cable is required to connect the two switches together.
F.A router must be used to forward VTP traffic between VLANs.
Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown？（）
A.The Serial 0/0 interface is passing traffic.
B.The DLCI 100 was dynamically allocated by the router.
C.The Serial 0/0 interface acquired the IP address of 172.16.3.1 from a DHCP server.
D.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloud.
E.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP.
A.1024
B.2046
C.4094
D.4096
E.8190
A.multicast
B.broadcast
C.allcast
D.podcast
E.anycast
A.Router C will use ICMP to inform Host 1 that Host 2 cannot be reached.
B.Router C will use ICMP to inform Router B that Host 2 cannot be reached.
C.Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached.
D.Router C will send a Destination Unreachable message type.
E.Router C will send a Router Selection message type.
F.Router C will send a Source Quench message type.
A.spanning-tree mode rapid-pvst
B.spanning-tree uplinkfast
C.spanning-tree backbonefast
D.spanning-tree mode mst
A.113.10.4.0
B.186.54.3.0
C.175.33.3.255
D.26.35.2.255
E.17.35.36.0
最新試題
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程？（）
要將數據包發送到遠程網絡，應使用哪種設備？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中存在多少個廣播域？（）
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet?？梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址？（）
OSI 模型的哪兩項功能在第2層實現？（）
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論？（）
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序？（）
請參見圖示。下列哪組設備僅包含中間設備？（）
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述，哪兩項是正確的？（）
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果？（）