A.Layer 3
B.Layer 4
C.Layer 2
D.Layer 5
您可能感興趣的試卷
你可能感興趣的試題
A.172.22.243.127
B.172.22.243.191
C.172.22.243.190
D.10.16.33.98
E.10.17.64.34
F.192.168.1.160
A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B.Each broadcast domain on a switch can have its own unique VTP domain
C.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
E.VTP pruning is used to increase available bandwidth in trunk links
F.Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords
如圖,每個交換機都配置了主機名,也都運行了RSTP,在就沒有做其他的配置了。下面哪三個選項正確的描述了RSTP的端口角色?()
A.SwitchA上,F(xiàn)a0/2,指定
B.SwitchA上,F(xiàn)a0/1,根
C.SwitchB上,GI0/2,根
D.SwitchB上,GI0/1,指定
E.SwitchC上,F(xiàn)a0/2,根
F.SwitchD上,GI0/2,根
A.destination address and wildcard mask
B.source address and wildcard mask
C.destination address and subnet mask
D.source address and subnet mask
A.show interfaces interface
B.show vlan bri
C.show interfaces interface switchport
D.show interface interface trunk
E.show interfaces vlan
What is the most likely reason for the dispartly between the actual network numbers at the branches and the routes in the routing table on Gateway-Router?()
A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates.
A.show ip ospf lsa database
B.show ip ospf link-state
C.show ip ospf neighbors
D.show ip ospf database
A.show ip access-list
B.show access-list
C.list ip interface
D.show interface
E.show ip interface
如圖,如果所有的鏈接都運行在相同的帶寬,哪些端口會被STP指定的端口?()
A. Switch A - Fa0/0
B. Switch A - Fa0/1
C. Switch B - Fa0/0
D. Switch B - Fa0/1
E. Switch C - Fa0/0
F. Switch C - Fa0/1
A.the switch with the lowest MAC address
B.the switch with the higest MAC address
C.the switch witch the higest IP address
D.the switch with the lowest IP address
最新試題
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()