A.IP prefix
B.Layer 2 circuit
C.RSVP request from CE for bandwidth reservation
D.BGP MED value
您可能感興趣的試卷
你可能感興趣的試題
A.They are used to summarize area routes to other areas.
B.They are used in not-so-stubby areas to propagate external routes.
C.They are used to notify areas of the ASBR.
D.They are flooded to all areas except stub areas （external route）.
A.The Layer 2 multicast address of the destination node
B.The solicited node multicast address of the destination node
C.The Layer 2 address of the destination node based on the destination IPv6 address
D.The IPv6 address of the destination node based on the destination Layer 2 address
A.CEF
B.FIB
C.LFIB
D.IGP
A.Be = 46320000 ，Bc = 96000
B.Be = 768000 ，Bc = 32000
C.Be = 128000 ，Bc = 7680
D.Be = 0 ，Bc = 96000
A.VRF
B.auto-summary
C.per-interface configuration
D.prefix-list support via route-map
E.prefix-list support via distribute-list
A.EIGRP for IPv6 is directly configured on the interfaces over which it runs.
B.EIGRP for IPv6 is not configured on the interfaces over which it runs， but if a user uses passive-interface configuration， EIGRP for IPv6 needs to be configured on the interface that is made passive.
C.There is a network statement configuration in EIGRP for IPv6， the same as for IPv4.
D.There is no network statement configuration in EIGRP for IPv6.
E.When a user uses a passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive.
F.When a user uses a non-passive-interface configuration， EIGRP for IPv6 does not need to be configured on the interface that is made passive
A.anycast address
B.site-local multicast
C.global address of the link
D.unique local address
E.link-local address
A.IPv6 prefixes
B.link-local addresses
C.solicited node multicast addresses
D.IPv6 prefixes and topology information
A.priority queue
B.weighted fair queues
C.round-robin service of output queues
D.LLQ
A.An IPv4-compatible tunnel is a static tunnel， but an 6to4 tunnel is a semiautomatic tunnel.
B.The deployment of a IPv4-compatible tunnel requires a special code on the edge routers， but a 6to4 tunnel does not require any special code.
C.An IPv4-compatible tunnel is typically used only between two IPv6 domains， but a 6to4 tunnel is used to connect to connect two or more IPv6 domains.
D.For an IPv4-compatible tunnel， the ISP assigns only IPv4 addresses for each domain， but for a 6to4 tunnel， the ISP assigns only IPv6 addresses for each domain.
最新試題
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?（）
How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?（）
What is the three main step of using the QoS feature with MQC command line interface？
Local Preference？
問一個怎么樣的屬性，能讓路由不通告給任何的peer？
A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?（）
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?（）
什么問題導致SERVER VTP密碼跟替他交換機VTP密碼不匹配？
A default Frame Relay WAN is classified as what type of physical network?（）
Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown？（）