what does three entries of the diagram mean? 給一張show ip bgp如下
您可能感興趣的試卷
你可能感興趣的試題
A.examine all packets received to make sure that the source addresses and source interfaces appear in the routing table and match the interfaces where the packets were received
B.check to see if any packet received at a router interface arrives on the best return path
C.combine with a configured ACL
D.log its events,if you specify the logging options for the ACL entries used by the unicast rpf command
E.inspect IP packets encapsulated in tunnels, such as GRE
A.It is applied only on the input interface of a router.
B.It is applied only on the output interface of a router.
C.It can be configured either on the input or output interface of a router.
D.It cannot be configured on a router interface.
E.It is configured under any routing protocol process.
A.Configure a routing process using the command ipv6 router ospf [process-id].
B.Add the network statement for the interfaces on which OSPF will run.
C.Configure OSPF on the interface that it will run on.
D.Use the passive-interface command on the interfaces on which OSPF should not run.
E.Enable routing.
A.BGP peers must be Layer 2-adjacent.
B.EBGP multihop is not configured.
C.The firewall is not configured to allow IP protocol 89.
D.The firewall is not configured to allow UDP 179.
A.route redistribution
B.import and export using route descriptors
C.import and export using route targets
D.Cisco MPLS Traffic Engineering
A.LSA 1
B.LSA 3
C.LSA 4
D.LSA 5
E.LSA 7
A.IP prefix
B.Layer 2 circuit
C.RSVP request from CE for bandwidth reservation
D.BGP MED value
A.They are used to summarize area routes to other areas.
B.They are used in not-so-stubby areas to propagate external routes.
C.They are used to notify areas of the ASBR.
D.They are flooded to all areas except stub areas (external route).
A.The Layer 2 multicast address of the destination node
B.The solicited node multicast address of the destination node
C.The Layer 2 address of the destination node based on the destination IPv6 address
D.The IPv6 address of the destination node based on the destination Layer 2 address
最新試題
SPT初始狀態之后的一個狀態是什么?
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
What field in IP packet is used for classification by QOS?
aaa架構中哪個是要求用戶輸入用戶名和密碼?
What is method list for configure aaa?
What is the next state of initial in spanning-tree protocol?
four switches, which one will be root switch.(no pic).
什么問題導致SERVER VTP密碼跟替他交換機VTP密碼不匹配?
How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?()
what is the disadvantage of policing?