A.Clear the MAC address table in the switch.
B.Clear the ARP cache in the switch.
C.Clear the ARP cache in the end devices.
D.Clear the ARP cache in the application servers.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. BGP-4 routing to the Internet,in normal behavior,may create asymmetrical routing for different prefixes. The BGP routing table indicates that traffic should follow the paths indicated in the exhibit,but packets are not going further than the border router in AS 4. What could be the cause of this problem?()
A.TCP Intercept is configured in AS 4.
B.Unicast Reverse Path Forwarding is configured in loose mode in this router.
C.Packets may be leaving AS 1 without the BGP routing flag set to 1.
D.Unicast Reverse Path Forwarding is configured in strict mode in this router.
E.There is a missing Unicast Reverse Path Forwarding configuration.
A.It blocks all routes.
B.It blocks the routes 200.0.12.0/24, 200.0.10.0/24 only.
C.It blocks the routes 200.0.12.0/24, 200.0.13.0/24 only.
D.It blocks the routes 200.0.10.0/24, 200.0.13.0/24 only.
E.Nothing happens, no routes are blocked.
A.route redistribution
B.import and export using route descriptors
C.import and export using route targets
D.Cisco MPLS Traffic Engineering
A.The trunking configuration mode on Switch1 is set to Off.
B.The trunking configuration mode on the other end is set to On.
C.The trunking configuration mode on the other end is set to Desirable.
D.Cisco Discovery Protocol is not running on the other end.
E.There is a VTP domain name mismatch.
F.Switch1 does not support 802.1Q.
最新試題
What is the next state of initial in spanning-tree protocol?
兩ebgp鄰居發(fā)路由過來 ,哪些屬性重置?
問一個怎么樣的屬性,能讓路由不通告給任何的peer?
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?()
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
What field in IP packet is used for classification by QOS?
A default Frame Relay WAN is classified as what type of physical network?()
What is method list for configure aaa?
What is the three main step of using the QoS feature with MQC command line interface?
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()