Refer to the exhibit. When applying this hierarchical policy map on the on the tunnel1 interface, you measure high jitter for traffic going through class 1234. What is the most likely cause of this jitter?()
A.The configuration of a hierarchical policy map on a tunnel interface is not supported.
B.Class 5555 and class 5554 are both taking up 100% of the bandwidth, leaving nothing for class 1234.
C.The burst size for the traffic shaping is wrongly configured to 15000; this would require an interface capable of sending at 150Mb/s.
D.The burst size for the traffic shaping has been wrongly configured; it should be set as low as possible.
E.The burst size for the traffic shaping has been wrongly configured; it should be set as high as possible.
您可能感興趣的試卷
你可能感興趣的試題
A.Tunnel IPv6 over IPv4 to connect far-end IPv6 networks.
B.Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible.
C.Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible.
D.What is the meaning of EUI-64 and how does it work?
E.Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.
A.mark VOIP traffic with IP precedence 6 and configure only ’fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the QoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VoIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
A.It blocks all routes.
B.It blocks the routes 200.0.12.0/24,200.0.10.0/24 only.
C.It blocks the routes 200.0.12.0/24,200.0.13.0/24 only.
D.It blocks the routes 200.0.10.0/24,200.0.13.0/24 only.
E.Nothing happens,no routes are blocked.
Refer to the exhibit. The Layer 2 network uses VTP to manage its VLAN database. A network designer created all VLANs on the VTP server (switch 1) and it has been advertised through VTP to all other VTP clients (switches 2 through 4). Due to network growth,a network operator decided to add a new switch between switch 1 and switch 3. The network operator has been instructed to use a refurbished switch and use a VTP client. Which three of these factors should the network operator consider to minimize the impact of adding a new switch?()
A.Pay special attention to the VTP revision number, because the higher value takes the priority.
B.Configure all VLANs manually on the new switch in order to avoid connectivity issues.
C.A trunk should be established between the new switch and switches 1 and 3 as VTP only runs over trunk links.
D.Set at least the VTP domain name and password to get the new switch synchronized.
E.An ISL trunk should be established between the new switch and switches 1 and 3,because VTP only runs over ISL.
F.Pay special attention to the VTP revision number, because the lower value takes the priority.
A.hostname
B.loopback address
C.default gateway
D.domain name
E.SSH peer address
最新試題
Refer to the exhibit.Which statement describes DLCI 17?()
如何實現(xiàn)擁塞避免?
What is method list for configure aaa?
Local Preference?
什么是NAT?
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()
當將多個交換機加入到MST region當中會發(fā)生什么(what happen)?
what is the disadvantage of policing?
什么問題導致SERVER VTP密碼跟替他交換機VTP密碼不匹配?
問一個怎么樣的屬性,能讓路由不通告給任何的peer?