您可能感興趣的試卷
你可能感興趣的試題
A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch
A.Cisco
B.ANSI - Annex D
C.Q.931 - Annex B
D.Q.933 - Annex A
A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering,with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.Log
B.Log-input
C.Log-output
D.Logging
A.Port 3/12 was already up and forwarding before the loop was created.
B.Port priority is based on lowest priority and lowest port number.
C.You connected the wire on port 3/18 last.
D.None of the above, it is purely random.
最新試題
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
what is the advantage of policing opposite to shaping?
What is method list for configure aaa?
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
aaa架構(gòu)中哪個是要求用戶輸入用戶名和密碼?
A default Frame Relay WAN is classified as what type of physical network?()
A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()
What is the next state of initial in spanning-tree protocol?
什么是NAT?