A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch
您可能感興趣的試卷
你可能感興趣的試題
A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering, with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001:DB8::1
D.2001:DB8:ABCD:FEEF::1
A.excessive collisions
B.FCS errors
C.runts
D.late collisions
A.BPDUs that enter a blocking port are discarded.
B.BPDUs that enter a blocking port are processed.
C.Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
D.BPDUs are only processed on forwarding ports.
A.The CBWFQ scheduler provides a guaranteed minimum amount of bandwidth to each class.
B.CBWFQ services each class queue using a strict priority scheduler.
C.The class-default queue only supports WFQ.
D.Inside a class queue, processing is always FIFO, except for the class-default queue.
A.It is a function used by routing protocols to install routes into routing table
B.It is a function that prevents the advertising of routes over an interface that the router is usingto reach a route
C.Its function is to help avoid routing loops.
D.It is a redistribution technique used by routing protocols
A.An update packet with init flag set from a known, already established neighbor relationship was received by one of the routers.
B.The counters were deleted.
C.The ARP cache was removed.
D.The IP EIGRP neighbor relationship was cleared manually.
最新試題
Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1?()
Which statement best describes OSPF external LSAs (type 5)?()
For the following ports, which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge?()
Which statement is correct about an OSPF sham-link?()
An administrator of a peer-to-peer server application reports that the maximum bandwidth that his application receives is 90 Mb/s. You have an 8-port,100-Mb/s EtherChannel bundle on the switching infrastructure between the two servers, resulting in a bidirectional throughput of more than what is recorded. Which two solutions would allow for more bandwidth for the application?()
Phase I and Phase II DMVPN differ in terms of which of these characteristics?()
f a Cisco switch is configured with VTPv1 in transparent mode, what is done with received VTP advertisements?()
Choose two commands that are required to enable multicast on a router, when it is known that the receivers use a specific functionality of IGMPv3.()
Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router?()
What does the OSPF command capability vrf-lite achieve?()