A. copy running-config: TFTP:
B. copy TFTP: running-config
C. copy TFTP: startup-config
D. copy startup-config: TFTP:
您可能感興趣的試卷
你可能感興趣的試題
A. copy running-config startup-config
B. copy startup-config: running-config
C. copy running config startup config
D. copy startup config running config
E. write terminal
A.10.1.1.1
B.127.0.0.1
C.192.168.0.1
D.239.1.1.1
A. The command establishes a static route
B. The command invokes a dynamic routing protocol for 192.168.12.0
C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1
D. Traffic for all networks is forwarded to 172.16.12.1
E. This route is automatically propagated throughout the entire network
F. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network
A. It provides dynamic neighbor discovery
B. It detects unreachable neighbors in 90 second intervals
C. It maintains neighbor relationships
D. It negotiates correctness parameters between neighboring interfaces
E. It uses timers to elect the router witch the fastest links as the designated router
F. It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF
A.addresseschosenbyacompanytocommunicatewiththeInternet
B.addressesthatcannotberoutedthroughthepublicInternet
C.addressesthatcanberoutedthroughthepublicInternet
D.aschemetoconservepublicaddresses
E.addresseslicensedtoenterprisesorISPsbyanInternetregistryorganization
A. When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B. Each broadcast domain on a switch can have its own unique VTP domain
C. VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
D. When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
E. VTP pruning is used to increase available bandwidth in trunk links
F. Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords
A. show interfaces interface
B. show vlan bri
C. show interfaces interface switchport
D. show interface interface trunk
E. show interfaces vlan
A. any-to-many communication model
B. delivery of packets to the group interface that is closest to the sending device
C. one-to-many communication model
D. the same address for multiple devices in the group
E. one-to-nearest communication model
F. a unique IPV6 address for each device in the group
A.HMAC-MD5
B.RSA
C.HMAC-SHA-1
D.DH1
E.DH2
A.reduced cost
B.bette rthroughput
C.increased security
D.scalability
E.reduced latency
F.broadband incompatibility
最新試題
A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?（）
At which layer of the OSI model dose PPP perform?（）
Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?（）
A network administrator is planning a network installation for a large organization.The design requires 100 separate subnetworks,so the company has acquired a Class B network address.What subnet mask will provide the 100 subnetworks required, if 500 usable host addresses are required per subnet?（）
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）
An employee of ABC company has move to an office on a different floor. Although the administrator is able to telnet to all of the routers,the address of Switch F is needed in order to verify that the employee remains in the same VLAN.Which action could be used by the administrator to find the IP address of Switch F?（）
Which address is the IPV6 all-RIP-routers muticast group address that is used by RIPng as the destaion address?（）
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
What is the subnetwork address for a host with the IP address 201.100.5.68/28?（）
At which layer of the OSI model is RSTP used to prevent loops?（）