Refer to the exhibit. Which two statements are correct？（）
A.All the routes were redistributed into BGP from an IGP
B.All the routes were originated by BGP with the network command
C.All six routes will be installed in the routing table
D.Four routes will be installed in the routing table
E.Two routes will be installed in the routing table
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. BGP has been configured on the routers in the network. However， the IBGPpeers in autonomous system 65200 have not converged. In addition， this console message wasgenerated on router R2：
*Mar 1 03：09：07.729： %TCP-6-BADAUTH No MD5 digest from 10.10.23.2（179） to10.10.23.3（11002）
On the basis of the information that is provided， what is the cause of the problem？（）
A.OSPF must be configured with the same MD5 authentication
B.BGP authentication can be used on iBGP peers when the connection is configured between theloopback interfaces
C.BGP authentication can be used on eBGP peers only
D.The password that is used for BGP authentication on both BGP peers in autonomous system65200 must be the same
Refer to the exhibit diagram and configuration. RTB is summarizing its networks from AS 64100with the aggregate-address command. However， the show ip route command on RTA reveals theRTB individual networks as well as its summary route. Which option would ensure that only thesummary route would appear in the routing table of RTA？（）
A.Add a static route with a prefix of 192.168.24.0 255.255.252.0 pointing to the null0 interface
B.Create a route map permitting only the summary address
C.Delete the four network statements and leave only the aggregate-address statement in theBGP configuration
D.Add the keyword summary-only to the aggregate-address command
A.The network was originated via redistribution of an interior gateway protocol into BGP
B.The network was defined by a static route
C.The network was learned via IBGP
D.The network was learned via EBGP
E.The network was originated via a network or aggregate command
A.Route reflectors
B.Route maps
C.Route redistribution
D.Peer groups
E.Aggregate addresses
A.Configure weight
B.Enable route reflector
C.Create a distribute list
D.Enable the Longer Autonomous System path option
E.All of the above
A.Router （config-router）#network 154.2.1.0
B.outer （config-router）#network 164.2.1.0
C.Router （config-router）#network-advertise 154.2.1.0
D.Router （config-router）#network 154.2.1.0 mask 255.255.255.0
E.None of the other alternatives apply
The BGP routing table consists of the following network routes：
What is the correct command to summarize these prefixes into a single summary prefix of192.168.12.0/22 while also allowing for the advertisement of the more specific prefixes？（）
A.network 192.168.12.0 mask 255.255.252.0
B.network 192.168.12.0 mask 0.0.3.255
C.network 192.168.12.0
D.aggregate-address 192.168.12.0 255.255.252.0
E.aggregate-address 192.168.12.0 255.255.252.0 summary-only
F.aggregate-address 192.168.12.0 255.255.252.0 as-set
A.A peer router running IBGP
B.A peer router running EBGP
C.A community member running IBGP
D.A peer group member running IBGP
E.A peer group member running EBGP
A BGP router is configured as shown below：
interface ethernet 0
ip address 10.10.10.1 255.255.0.0!
int serial 0
ip address 172.16.1.1 255.255.255.252!
router bgp 65001
neighbor 192.168.1.1 remote-as 65002
Based on the above configuration， which of the following BGP statements would inject the10.10.0.0/16 prefix into the BGP routing table？（）
A.network 10.0.0.0
B.network 10.10.0.0 mask 255.255.0.0
C.network 10.10.10.1 mask 255.255.255.255
D.network 10.10.10.0 mask 255.255.255.0
E.network 10.0.0.0 mask 255.255.0.0
A.The IBGP routers must always be fully meshed
B.The IBGP routers can be in a different AS
C.The IBGP routers must be directly connected
D.The IBGP routers do not need to be directly connected
E.None of the other alternatives apply are true
最新試題
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
Drag the DSL technologies on the left to their maximum（down/up） data rate values on the below.
In computer security， AAA stands for authentication， authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct？（）
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
Study the exhibit carefully.Routers A and B are customer routers. Routers 1， 2， 3 and 4 are provider routers. The routers areoperating with various IOS versions. Which frame mode MPLS configuration statement is true？（）
Drag the DSL local loop topic on the left to the correct descriptions on the right.